DJI Terra: Digitalisieren Sie die Welt – Jetzt mit neuen Lizenzmodellen Analysieren und visualisieren Sie Ihre Umgebung mit DJI Terra, der benutzerfreundlichen Kartierungs ...

DJI Terra: Digitalisieren Sie die Welt – Jetzt mit neuen Lizenzmodellen Analysieren und visualisieren Sie Ihre Umgebung mit DJI Terra, der benutzerfreundlichen Kartierungs ...

DJI Terra: Digitalisieren Sie die Welt – Jetzt mit neuen Lizenzmodellen Analysieren und visualisieren Sie Ihre Umgebung mit DJI Terra, der benutzerfreundlichen Kartierungs ...

DJI Zenmuse L3 Long-Range LiDAR System with Highest Accuracy   The DJI Zenmuse L3 is a state-of-the-art, next-generation aerial LiDAR system delivering exceptional range and accuracy. Its 1535 nm LiDAR sensor reaches up to 950 meters even on targets with only 10% reflectivity. Dual 100-megapixel RGB mapping cameras and a high-precision Position and Orientation System (POS) accelerate geospatial data acquisition, enabling daily coverage of up to 100 km².   1535 nm Long-Range LiDAR: Extended Range, Broad Coverage The Zenmuse L3 achieves a maximum detection range of 950 meters at 100 kHz pulse frequency under 100 klx ambient light and 10% reflectivity. The adjustable pulse frequency provides flexible power output, optimizing performance for various operational scenarios. Typical flight altitudes between 300 and 500 meters increase coverage per flight and significantly improve mapping efficiency.   Small Measurement Point, High Pulse Energy With a laser beam divergence of only 0.25 mrad (1/e²), the laser footprint diameter at distance is about one-fifth that of the Zenmuse L2. This enables clear detection of smaller objects such as power lines or branches. The higher energy density improves penetration, increases ground point density, and allows precise reconstruction of complex terrain.   High Pulse Repetition Rate, Multiple Returns With up to 2 million pulses per second and support for up to 16 returns, the Zenmuse L3 delivers accurate 3D spatial reconstructions. Point density and penetration level can be flexibly adapted to meet specific application requirements.   Flexible Scanning Modes The system supports linear, star-shaped, and non-repetitive scanning modes for various applications:      · Linear: uniform point cloud distribution for precise terrain modeling     · Star-shaped: balances accuracy with high penetration, ideal for forests or urban areas     · Non-repetitive: wide scan angle and extensive coverage, optimized for powerline and structural inspections   Dual 100 MP RGB Camera System Equipped with two 100 MP 4/3 CMOS sensors and mechanical shutters, the L3 significantly improves accuracy and efficiency. Pixel binning supports an effective resolution of 25 MP with larger pixels, ensuring vivid colors even in low-light conditions.   107° Ultra-Wide Field of View The dual RGB cameras offer up to 107° horizontal field of view, capturing a larger area per image. Even with 20% LiDAR overlap, digital orthophoto maps (DOM) and digital elevation models (DEM) can be acquired simultaneously in a single flight, greatly boosting productivity.   Accuracy Meets Efficiency The enhanced Position and Orientation System (POS) achieves post-processing accuracy of 0.02° yaw and 0.01° pitch. The LiDAR offers ranging repeatability of 5 mm at 150 m and microsecond timing for highly precise results. Vertical accuracy is under 3 cm at 120 m altitude, under 5 cm at 300 m, and under 10 cm at 500 m suitable for mapping scales from 1:500 to 1:2000. With a ground sample distance (GSD) of 3 cm at 300 m altitude, the L3 enables precise mapping even without ground control points (GCP).   High Point Density, Strong Penetration & High Efficiency Thanks to smaller laser footprints and higher pulse energy, the L3 captures significantly more ground points beneath vegetation, enhancing detail, accuracy, and model completeness. Combined with the DJI Matrice 400, the Zenmuse L3 covers up to 10 km² per flight and up to 100 km² daily. Multiple data types, such as point clouds, orthophotos, and 3D models, can be collected in a single mission.   DJI Terra Integration: PPK, LiDAR Gaussian Splatting & Fusion-Based Modeling DJI Terra provides integrated PPK (Post-Processed Kinematic) data processing for centimeter-level positioning accuracy, even without RTK availability. The software supports local PPK processing for RGB imagery and LiDAR data. Advanced Gaussian Splatting technology produces highly detailed and realistic 3D models. Fusion of LiDAR and RGB data in a single dataset enables simultaneous generation of high-accuracy point clouds, 2D maps, and 3D mesh models. This data fusion approach improves model completeness, especially for complex structures, meeting the needs of energy, transportation, and infrastructure sectors.   Integrated End-to-End Solution The L3 works seamlessly within the DJI ecosystem from data capture and PPK post-processing in DJI Terra to cloud analysis in DJI FlightHub 2. Real-time point cloud previews, live measurements, and flexible split-screen views increase mission efficiency and safety.   Secure Data Processing CFexpress card encryption and AES-256 video transmission encryption protect sensitive data. The Matrice 400 also supports one-click log clearing for added security.   Typical Applications Topographic surveying, civil and geotechnical engineering, geological studies and hazard mapping, forestry and vegetation analysis, energy and powerline inspections, mining and infrastructure surveying.   Please note: The DJI Zenmuse L3 is only compatible with the DJI Matrice 400 due to the payload weight of 1.6 kg, the new gimbal bracket with anti-drop gimbal rails, and the higher power consumption of the 1535 nm laser.

DJI Terra: Digitalisieren Sie die Welt – Jetzt mit neuen Lizenzmodellen Analysieren und visualisieren Sie Ihre Umgebung mit DJI Terra, der benutzerfreundlichen Kartierungs ...

DJI Terra: Digitalisieren Sie die Welt – Jetzt mit neuen Lizenzmodellen Analysieren und visualisieren Sie Ihre Umgebung mit DJI Terra, der benutzerfreundlichen Kartierungs ...

The XGRIDS Lixel L2 Pro is a powerful, state-of-the-art 3D hand scanner designed specifically for large-area indoor and outdoor mapping applications. Thanks to innovative Multi-SLAM algorithms, deep AI optimisation, and the perfect combination of LiDAR sensing, visual 48 MP panorama cameras, and integrated IMU, the L2 Pro delivers real-time point clouds in the field with post-processing–quality results. With point densities of up to 1 million points per square meter at 1 mm spacing and an absolute accuracy of only 3 cm, the L2 Pro sets new benchmarks for mobile mapping, topography, infrastructure, and construction surveying.   Features       · Mobile 3D LiDAR-SLAM scanner with real-time point clouds including high-resolution colour capture     · Multi-SLAM and deep AI optimisation: live calculation of powerful point clouds and three-colour models directly on site     · 3D Gaussian Splatting for ultra-dense, realistic, and compact visualisations (with LixelCyberColor Studio)     · Two 48 MP panorama cameras (190° field of view) for photorealistic colour images without additional modules     · Extremely flexible application: hand-held device, vehicle, backpack, or drone mount possible     · 1.5 h battery life, rugged aluminium housing, IP45 protection class for demanding field conditions     · Intuitive operation with the LixelGo app (Android & iOS) or one-button operation, real-time status display on the device   Available in three variants:       · 120 m / 16 channels – efficient for medium to large areas with good scan range     · 120 m / 32 channels – increased point density and detail with good scan range     · 300 m / 32 channels – maximum range with top resolution for large-scale projects   Applications and workflow   Whether construction, urban inventory, large-scale infrastructure, BIM, GIS, or environmental projects: The L2 Pro reliably delivers precise and true-to-colour 3D data quickly and flexibly. Modern AI algorithms ensure stable Multi-SLAM performance even in complex, low-signal environments (indoor spaces, tunnels, vegetation). Real-time point cloud output and the integration of various mounting options maximise field efficiency. The all-in-one software LixelStudio (included) enables comprehensive post-processing, fusion, analysis, and export of professional 3D point cloud data. The LixelGO app for Android and iOS connects the device to a smartphone, enabling control and monitoring of scans directly in the field.   Technical specifications Lixel L2 Pro       · Weight: 1.7 kg (without battery)     · Size: 180 × 130 × 400 mm     · Housing: Industrial aluminium     · Protection class: IP54 (dust- and splash-proof)     · Operating temperature: -20 °C to +50 °C     · Interface: USB 3.1 Gen2     · Storage: 1 TB SSD     · Wireless connection: WiFi (2.4G, 5G2, 5G8), Bluetooth (802.11a/b/g/n/ac)     · Visual Positioning: supported     · Real-time RTK Fusion: supported     · Real-time RGB: supported     · Point cloud formats: .las     · Image formats: .jpg     · Software included: LixelStudio     · Compatibility: Standard RTK module, Survey-Grade RTK module, Extension Pole, Backpack Kit, Vehicle/Drone Mount, Mobile-Phone-Mount   Real-time accuracy:     · Absolute vertical accuracy (RMSE): 3 cm     · Absolute horizontal accuracy (RMSE): 3 cm     · Relative accuracy (RMSE): 2 cm   Processed accuracy:     · Absolute vertical accuracy: 3 cm     · Absolute horizontal accuracy: 3 cm     · Point cloud thickness: 0.5 cm     · Horizontal (with RTK): 0.015°     · Vertical: 0.03°     · Relative accuracy (RMSE): 1 cm     · Reproducibility (RMSE): 2 cm     · LixelUpSample: supported   LiDAR:     · Operating range: 0.5–120 m (16 channels), 0.5–300 m (32 channels)     · Scan frequency: 320,000 points/second (16 channels), 640,000 points/second (32 channels)     · LiDAR sensor: Class 1 / 905 nm     · Sensor FOV: 360° × 270°   Panorama camera:     · Resolution: 2 × 48 MP     · CMOS, sensor size: 1/2"     · Focal length: 2 mm     · Aperture: F/2.0     · Shutter: Rolling Shutter     · Field of view: 190° × 190°     · Maximum panorama image resolution: 56 MP   Visual positioning camera:     · Resolution: 1 MP     · Global shutter     · Field of view: 190° × 119°   Battery:     · Voltage: 14.4 V     · Capacity: 46.8 Wh     · Operating time: approx. 1.5 hours per battery     · Power consumption: < 30 W   Charging:     · Input: 100V-240V, 50-60 Hz, 1.5 A, 80 VA     · Output: 16.8 V, 2.0 A     · Power: 34 W

DJI Terra: Digitalisieren Sie die Welt – Jetzt mit neuen Lizenzmodellen Analysieren und visualisieren Sie Ihre Umgebung mit DJI Terra, der benutzerfreundlichen Kartierungs ...