Emlid Rover Zubehörset ...

The EMLID Reach RS4 Pro is an all-band RTK GNSS receiver with dual cameras for visual stakeout and remote point capture for faster and safer work. It also features tilt compensation (IMU) that maintains ultimate precision even in challenging conditions and under dense tree canopies. It offers RTK accuracy of 7 mm + 1 ppm, and with tilt compensation achieves 2 mm + 0.3 mm/° precision. Operating as both base and rover, it supports 915 MHz LoRa and 450 MHz UHF NTRIP communication.   Powered by a Li_Ion battery, the RS4 Pro runs up to 16 hours on a single charge, with USB Type_C charging available. Its magnesium alloy body, IP68 dust_ and waterproof rating, and wide operating temperature range from _40 °C to +65 °C make it ideal for harsh field conditions.   Discover the new way to survey with dual cameras The Reach RS4 Pro introduces a new way to survey with its dual Full HD cameras, extending capabilities beyond traditional RTK. Stakeout is faster and more intuitive with AR guidance, as your design is overlaid directly on the real world, showing exactly where to place stakes rather than just following a map. Features like dynamic navigation, auto bullseye view, cut & fill indicators, and quick point switching help crews work more efficiently, even on complex construction sites and roadworks.   The RS4 Pro also enables measurement from images, allowing you to capture data from locations where you cannot place the survey pole. Building facades, areas behind fences, across busy roads, over water, past hedges, above pits, and around machinery can all be measured without physical access. This eliminates the need to set up a total station for such tasks and helps avoid hazardous areas.   Unmatched Precision With 672 channels, the EMLID Reach RS4 Pro can track 40+ satellites at a time from all major constellations (GPS, GLONASS, Galileo, BeiDou, QZSS, and NavIC). With support for L1, L2, and the lower L5 and L6 band frequencies, it ensures strong multipath resistance and reliable signal reception. The Reach RS4 Pro thus delivers reliable performance and centimeter-level accuracy with 7 mm + 1 ppm precision in RTK mode. The receiver achieves a fixed RTK solution in less than 5 seconds, providing fast and dependable positioning in the field.   Next-gen tilt compensation The Reach RS4 Pro comes factory_calibrated, ensuring instant readiness with no need for field adjustments. Its tilt compensation works reliably under all conditions and is immune to magnetic interference, maintaining accuracy even near metal objects. With faster initialisation and no angle limit, it provides precise measurements even at steep tilts. The compensation mechanism activates with just a few moves and remains stable throughout the survey, saving time and avoiding the need for recalibration.   Base and rover connectivity The Reach RS4 Pro can operate as both base and rover, supporting RTK work with VRS or a single baseline CORS network in RTCM3 format.  You can also connect another GNSS receiver as an NTRIP base using EMLID NTRIP Caster.  It features a dual_band radio system:      · UHF 450 MHz for transmit and receive, with up to 2 W output (may require a license), compatible with Reach and 3rd_party receivers that support TRIMTALK 450S.      · LoRa 915 MHz for transmit and receive, with up to 1 W output (license_free in North America), compatible with Reach receivers.   Engineered for the harshest environments The Reach RS4 Pro's magnesium alloy body is both light and exceptionally durable, similar to materials used in aerospace and high-end electronics. This combination ensures strength and ease of handling, even in the toughest environments. With up to 16 hours of continuous operation on a single charge, the RS4 Pro is designed for long field days. It can be recharged via USB-C or powered by a portable power bank for added flexibility.   Thanks to its IP68 rating, the receiver is completely dustproof and waterproof, continuing to operate reliably in rain, snow, or dusty construction sites. Operating temperatures range from -40°C to +65°C, ensuring consistent performance in both extreme cold and intense heat.   Software for every stage of your project The Reach RS4 Pro includes EMLID Flow, a complete mobile and cloud-based solution compatible with iOS and Android. It keeps your team coordinated and your projects running smoothly while supporting all essential site tasks.   With EMLID Flow, you can coordinate your team by inviting members, sharing projects, and managing access. Monitor field progress directly from the office and exchange data in real time with automatic synchronisation. The unified workflow ensures consistent data, a familiar interface, and no need for additional training.   On site, EMLID Flow enables you to carry out key surveying tasks efficiently:       · Topographic surveys for precise terrain and elevation data     · Stakeout and layout operations for placing points, lines, and markers     · Line and road surveys for staking centerlines and offsets     · Cut and fill calculations for measuring earthworks and stockpiles     · As-built verification to ensure structures match design plans   Technical Specifications:   Imaging     ·  Image sensors: 1/2.6 in, CMOS, global shutter, Full HD Field of view:     ·  Front camera: H: 64.6°, V: 42.8°     ·  Bottom camera: H: 63°, V: 42°     ·  Video frame rate: 25 fps    Mechanical     ·  Dimensions: 128.6 x 128.6 x 99.3 mm     ·  Weight: 920 g (2.028 lb)     ·  Operating temperature: -40 to +65 °C (-40 to 149 °F)     ·  Ingress protection: IP68    Electrical     ·  Autonomy: 16 hrs as RTK rover with tilt     ·  Battery: Li-Ion 5000 mAh, 7.2 V, 36 Wh     ·  Charging: USB Type-C (PD): 5V—3A, 9V—3A, 12V—3A, 15V—3A    Positioning     ·  Static: H: 4 mm + 0.5 ppm | V: 8 mm + 1 ppm     ·  PPK: H: 5 mm + 0.5 ppm | V: 10 mm + 1 ppm     ·  RTK: H: 7 mm + 1 ppm | V: 14 mm + 1 ppm     ·  Tilt compensation: RTK + 2 mm + 0.3 mm/°     ·  Convergence time: ~5 s typically    Connectivity     ·  LoRa radio: up to 1W     ·  Frequency range: 868/915 MHz     ·  Power: 0.1 W     ·  Distance: Up to 8 km     ·  UHF radio: up to 2W     ·  Frequency range: 410 - 470 MHz     ·  Protocols: TRIMTALK 450S     ·  Modulation type: GMSK     ·  LTE modem     ·  Regions: Global     ·  Bands: FDD-LTE: 1, 2, 3, 4, 5, 7, 8, 12, 13, 18, 19, 20, 26, 28 TD-LTE: 38, 39, 40, 41 UMTS (UHPS/FDD): 1, 2, 5, 8 Quad-band, 850/1900, 900/1800 MHz     ·  SIM card: Nano-SIM     ·  Wi-Fi: 802.11 b/g/n     ·  Bluetooth: Bluetooth 5.1 (BR/EDR + LE)     ·  Ports: RS-232, USB Type-C  *Use the correct antenna, LoRa or UHF, for your setup    Data protocols     ·  Corrections: NTRIP, RTCM3     ·  Position output: NMEA, LLH/XYZ     ·  Data logging: RINEX, NMEA, LLH/XYZ, UBX     ·  Internal storage: 16 GB    GNSS     ·  Signal tracked: GPS: L1C/A, L2C, L5, GLONASS: L1OF, L2OF, Galileo: E1-B/C, E5a, E6, BeiDou: B1I, B1C, B2a, B3I, QZSS: L1C/A, L1C/B11, L2C, L5, NavIC: L1-SPS Data, L5-SPS     ·  Number of channels: 672     ·  Update rates: up to 10 Hz

EMLID Reach RS4 Base and Rover Kit (RS4 Pro + RS4 + many Accessories)   A powerful RTK set: the Reach RS4 base and the Reach RS4 Pro rover.   Build a powerful RTK GNSS setup with this versatile kit. Use the RS4 as a fixed base station and pair it with the RS4 Pro, which is equipped with dual cameras, as your rover. Together, they provide accurate positioning and effortless stakeout, making them ideal for surveying, mapping and advanced fieldwork.

Light handheld camera for real-time 3D scanning and interactive spatial models with 3D Gaussian Splatting technology.

Carry Less, Capture More   The DJI Mic Mini is a lightweight wireless microphone system that combines compact design with powerful performance. It delivers stable, high-quality audio transmission, extended battery life, and seamless integration with the DJI OsmoAudio™ ecosystem. Whether for vlogs, interviews, or professional shoots – this mic ensures clear, detail-rich sound. Just flip open the case, and you’re ready to record premium audio anytime.   Compact, Ultralight, Discreet   Stable, high-quality audio transmission Up to 48 hours of operation with charging case Direct connection to DJI OsmoAudio™ for superior sound Two-level active noise cancellation Automatic limiting to prevent clipping   Weighing only 10 g, the transmitter is comfortable to wear and barely noticeable. With options like magnetic attachment or clip-on, it stays secure even on thin fabrics without flipping outward – ensuring a neat, professional on-camera look.   All-in-One Portability The innovative charging case neatly stores two transmitters, one receiver, adapters, and windscreens. Windscreens can remain attached while stored, making the system fast and convenient to use on the go.   Premium Audio – Rich in Detail The Mic Mini supports omnidirectional recording and can connect two transmitters to one receiver simultaneously. Even with multiple sound sources, it captures clear, detailed audio for professional results.   Two-Level Noise Cancellation Basic Mode: Reduces subtle indoor noises (fans, AC) while keeping vocals natural. Strong Mode: Ideal for noisy outdoor settings, cutting ambient sounds for crisp voices.   With windscreens, wind noise and other unwanted sounds are greatly reduced – perfect for outdoor shoots, livestreams, or travel vlogs.   Safety Features for Reliable Sound Auto Limiting prevents clipping by automatically adjusting input levels. Safety Track (via DJI Mimo app) records a secondary track at -6 dB, protecting against unexpected spikes in volume.   Flexible Recording Options 5-level gain adjustment on the receiver Supports mono and stereo recording   Dual-track safety recording for added assurance Extended Battery Life & Quick Charging Up to 11.5 hrs per transmitter, 10.5 hrs per receiver Combined with the case: 48 hrs total use 5-min quick charge = 1 hr use Full charge in approx. 90–100 minutes   Smart power-saving features like auto-sleep and auto power-off help conserve battery.   Stable 400m Transmission With strong anti-interference performance, the Mic Mini ensures a stable connection and clear audio even in crowded or challenging environments.   Direct Connection & Wide Compatibility Direct plug-and-play with Osmo Action 5 Pro, Osmo Action 4, and Osmo Pocket 3 – no receiver required Works with cameras, smartphones, tablets, and PCs Camera sync power on/off supported Can charge both smartphone and receiver simultaneously via USB-C   Wireless Recording with DJI Neo The Mic Mini is fully compatible with the DJI Neo drone. Once paired through the DJI Fly app, audio recording is automatically synced to video while propeller noise is filtered out – perfect for smooth aerial vlogs.   The transmitter also connects directly to smartphones via Bluetooth, offering a receiver-free solution for mobile creators and livestreamers using third-party apps.   DJI Mimo App – Complete Control Manage your setup directly in the app:   Easy firmware updates for transmitters and receiver Adjust noise cancellation, auto-limiting, and recording functions Enable safety tracks One-tap system updates

Emlid Rover Zubehörset ...

DJI Matrice 4E Die DJI Matrice 4 Serie ist eine neue Generation von kleinen intelligenten Multi-Light-Flaggschiff-Drohnen für Unternehmen, die einen neuen Maßstab für int ...