€199.90
Available, delivery time: 2-4 days
- Charges up to three Matrice 4 batteries simultaneously in just 1 hour 50 minutes for uninterrupted missions
- 1.5-inch IPS LCD clearly shows charging parameters, mode selections, and updates for easy use
- Three smart charging modes to extend battery life: 60% storage, full charge, and quiet silent mode
- Three charging ports up to 180W and USB-C up to 36W for simultaneous charging of remote and devices
- Protection features OTP, OVP, OCP, SCP, UVP, and OPP plus smart temperature control ensure maximum safety.
Description
The LKTOP 200W three-way smart charger for DJI Matrice 4 batteries allows simultaneous charging of three intelligent flight batteries and a remote control via USB-C. With a maximum output power of up to 200W, it provides an efficient and smart charging experience, supports three charging modes, and features active cooling. Firmware can be updated via a mobile app for the latest features.
Features
- Fast charging: The Matrice 4 charging hub charges up to three batteries simultaneously in just 1 hour and 50 minutes, ensuring rapid energy recovery for uninterrupted flights.
- LCD display: The high-contrast 1.5-inch IPS wide-angle display keeps all charging parameters, mode selections, battery information, and OTA update progress clearly visible for an especially user-friendly operation.
- Flexible charging modes: Three intelligent charging modes are available for different scenarios and optimal maintenance: 60% storage mode for battery preservation, 100% full charge mode, and silent mode with reduced fan speed.
- Versatile ports: Three charging ports support up to 180 watts per channel and are compatible with multiple battery types. The USB-C port delivers up to 36 watts and allows simultaneous charging of remote controller, camera, or smartphone.
- Intelligent safety: The efficient ventilation system with smart temperature control ensures optimal heat dissipation, while dedicated protection features for overheating, overvoltage, overcurrent, short circuit, undervoltage, and overload provide a secure charging process for all connected devices.
Technical Specifications
· Supported battery types: DJI Matrice 4 series (2S battery = 2 cells in series, approx. 7.4 V nominal voltage; 4S battery = 4 cells in series, approx. 14.8 V nominal voltage)
· Input Voltage: 100-240V, 2.5A, 50-60Hz
· Maximum Charging Power: 180W per single battery, 200W for multiple batteries
· USB-C Output: 5V3A, 9V3A, 12V3A, 15V2.4A, 20V1.8A, max 36W
· Operating Temperature Range: 5 - 40 °C
· Dimensions (W x D x H): approx. 138 x 64 x 52 mm
· Weight: 380 g (without cable)
· Display: 1.5-inch IPS wide viewing angle screen
· Charging Modes: Full charge, Silent mode (max 100W), Storage mode (~60% charge)
· Additional Features: Firmware updates via app, intelligent power allocation, built-in cooling fan
Charging Times (using DJI Matrice 4 batteries as example):
· 1 battery: approx. 56 minutes
· 2 batteries: approx. 95 minutes
· 3 batteries: approx. 110 minutes
| Accessories: | Chargers |
|---|---|
| Product type: | Accessories (drones) |
Video 1
Documents 1
Delivery content
1x Charger for DJI Matrice 4 Series Batteries
1x AC power cable
3x Charging Cable for Matrice 4 Series Batteries
1x Charging Cable USB-C to USB-C
1x Instruction manual
Reviews 0
Login
according to EU Battery Regulation 2023/1542 & Battery Act Implementation Law (BattDG)
Batteries and accumulators must not be disposed of in household waste. Consumers are legally required to return used batteries and accumulators. You can hand in used batteries free of charge at a municipal collection point or at local retailers. We, as a retailer, are also obliged to take back used batteries – our obligation to take back is limited to batteries of the types that we currently sell or have sold.
The symbol of the crossed-out waste bin indicates that batteries and accumulators must not be disposed of in household waste. Below this symbol, the following chemical symbols may appear:
"Pb" for Lead
"Cd" for Cadmium
"Hg" for Mercury
These substances are particularly harmful to the environment and health. Please help protect the environment by disposing of batteries and accumulators properly.
Epotronic GmbH WEEE Reg. No. DE 52637354
Secure exclusive discounts now!
Register as B2B Customer here
Customers also viewed
The EMLID Reach RX2 Scanning Kit comprises a practical scanning handle with hand loop, a protective carrying case with EVA foam inlay and a 3 mm Allen key. The case also provides room for a phone case with SP Connect SPC+ (maximum size 6.9", e.g. case for iPhone 16 Pro Max) that can be used with the smartphone holder. The kit thus contains all the accessories needed to work comfortably with Reach RX, Reach RX2 and provides an integrated solution for PIX4Dcatch. The handle with attached Reach RX or Reach RX2 can be placed in left-handed or right-handed orientations. Case Specifications · Outer case material: shock-resistant EVA laminated with water-resistant polyester fabric. · Dimensions: 365 x 210 x 95 (mm) · Weight: 0.65 kg · Handle can be placed in both left handed and right handed orientations
Dreieck Dreifuss Kit Der Triangl-Dreifuß mit optischem Lot und drehbarem Adapter ist ein hochpräziser, wartungsfreier Dreifuß, der für Langzeitbelastungen in allen Umgebu ...
The XGRIDS Lixel L2 Pro Vehicle Mount is a specially designed vehicle mount for the XGRIDS Lixel L2 Pro LiDAR scanner that significantly simplifies mobile 3D data capture across large areas. With this mount, you can securely attach the LiDAR system to your vehicle and capture point clouds in real time with high precision while driving at speeds up to 40 km/h. The system features an intelligent suction mount with a monitoring system that ensures secure installation and issues warnings if needed. The mount supports a live preview of the point cloud, allowing you to check data quality on site. This vehicle mount turns the Lixel L2 Pro into an efficient mobile LiDAR scanner, ideal for applications such as road mapping, infrastructure inspection, and large-scale surveying tasks with high accuracy. This mount enables flexible, high-precision deployment of the premium Lixel L2 Pro LiDAR scanner in mobile applications, greatly simplifying data capture in complex or large environments. Technical Specifications · Secure suction mount with monitoring system for stable attachment · Live real-time point cloud preview for data quality control · Drive-capable at speeds up to 40 km/h · Absolute accuracy (horizontal): approx. 3 cm (within RTK range < 100 m) · Compatible with Lixel L2 Pro scanner system (LiDAR + cameras + IMU) · Real-time feedback and warnings for mounting issues
DJI M400 with up to 6 kg payload and 55 min flight time for surveying, inspection, AI, wildlife rescue, construction, energy, agriculture, RTK, lidar, thermal imaging
SHARE SLAM S20 ...
XGRIDS - Lixel L2 Pro Verlängerungsstab Kit Mit dem 2m Verlängerungsstab lässt sich der Lixel L2 Pro für Anwendungsbereiche mit erhöhtem Scan-Ausgangspunkt für eine besse ...