Handheld-Scanner

GeoCue TrueView GO132S Basic   TrueView GO132S Traditional w/perpetual LP360 Land Basic LiDAR Sensor   Data Collection LIDAR, Imagery, GNSS and SLAM   Sensor Survey Grade, Class 1 Eye Safe laser @ 905nm   Range 0.05 m - 300 m   Range - Usable 80 m @ 10% Reflectivity (channels 5 to 12); 50 m @ 10% Reflectivity (channels 1 to 4, 13 to 16) ​   Beams/Returns 32/2   FOV - Horizontal 270°   FOV - Vertical 40° (-20.8° to +19.5°)   Pulse Rate 640 kHz   System   Control WIFI + button control   Storage 512 GB   Loop-free Data Aquisition Yes   Real-time Accuracy Assessment Yes   System Performance   Absolute Accuracy H <5 cm RMS V <5 cm RMS Relative Accuracy <1 cm   Platform   Size Length: 213.5 mm Width: 126 m Height: 317 mm Weight: 1.9 kg (including RTK and battery)   Power Supply Mode Lithium Battery, supports hot-swapping and portable charger   Battery Working Time 1 hr   Operating Temperature -20° to 50° C   Cameras   Type Three 5 MP cameras (15 MP)   FOV 210° x 170°

GeoCue TrueView GO116S Standard   TrueView GO116S Traditional w/perpetual LP360 Land Standard   LiDAR Sensor   Data Collection LIDAR, Imagery, GNSS and SLAM   Sensor Survey Grade, Class 1 Eye Safe laser @ 905nm   Range 0.05 m - 120 m   Range - Usable 80 m @ 10% Reflectivity (channels 5 to 12); 50 m @ 10% Reflectivity (channels 1 to 4, 13 to 16) ​   Beams/Returns 16/2   FOV - Horizontal 270°   FOV - Vertical 30° (-15, 0, +15)   Pulse Rate 320 kHz   System   Control WIFI + button control   Storage 512 GB   Loop-free Data Aquisition Yes   Real-time Accuracy Assessment Yes   System Performance   Absolute Accuracy H <5 cm RMS V <5 cm RMS Relative Accuracy <1 cm   Platform   Size Length: 213.5 mm Width: 126 m Height: 317 mm Weight: 1.9 kg (including RTK and battery)   Power Supply Mode Lithium Battery, supports hot-swapping and portable charger   Battery Working Time 1 hr   Operating Temperature -20° to 50° C   Cameras   Type Three 5 MP cameras (15 MP)   FOV 210° x 170°

GREENVALLEY LiGrip O1 Lite GNSS Modul   GNSS Module for LiGrip O1 Lite   RTK Module GNSS System Supports 5-constellations 14-band RTK Accuracy Horizontal 0.8 cm + 1 ppm, Vertical 1.5 cm + 1 ppm GPS：L1 / L2 / L5 RTK Protocol NTRIP GLO：L1 / L2 Network Communication 4G Global Pass[4] BDS：B1I / B2I / B3I Size L 45 mm × W 45 mm × H 95 mm GAL：E1 / E5a / E5b Weight 119 g QZSS：L1 / L2 / L5 GNSS Raw Data Format log Compatibility Support for LiGrip O1 Lite and LiGrip O1 RTK Data Format rtk

GREENVALLEY LiGrip O1 Lite   The LiGrip O1 Lite is the latest generation of lightweight products in GreenValley International’s LiGrip handheld series. It features an integrated design and supports various mapping methods, including RTK-SLAM, PPK-SLAM, and SLAM. It can output real-time, high precision, true-color LAS point cloud data with absolute coordinates. The LiGrip O1 Lite can be equipped with an RTK module and a telescopic pole, making it suitable for applications such as floor plan measurement, mine surveying, stockpile measurement, and facade measurement. Combined with LiDAR360 and LiDAR360MLS software, it provides customers with a more efficient turnkey solution.   System Parameters Size L 184 mm × W 115 mm × H 045 mm Weight 1,0 kg Voltage 14,4 V Battery 3350 mAh Storage 256 GB SSD   IP Rating IP54 Connections USB, Ethernet Battery Life ~ 180 min Suitable Environments Indoor and outdoor scenarios   LiDAR Parameters Scan Rate 200.000 pts/s Scan Range 40 m 10 % reflectivity, 70 m 80 % reflectivity FOV: horizontal 360°, vertical -7° ~ 52°   Camera Type LiCam resolution 3840 × 2160 Data Format .bin (before parsing), .JPEG (after parsing)   Resulting Data Relative Accuracy ≤3cm* Absolute Accuracy 5cm Point Cloud Formats .Las, .LiData

GREENVALLEY LiGrip H120 Backpack Kit   The GreenValley’s backpack kit is a versatile accessory designed for handheld 3D LiDAR SLAM systems. Featuring an ergonomic design for comfortable wear, it is lightweight and easy to assemble and disassemble. With an integrated GNSS antenna, it supports PPK and RTK (requires separate purchase of RTK module for H300 and H120) and directly outputs point cloud data with absolute positioning. This saves time and improves your operational efficiency. The integrated backpack frees up your hands, making work more comfortable and efficient. It is suitable for applications in surveying, forestry, stockpiles, powerline scanning, mining, and more.   Product Advantages   Light And Small Minimalist shape, greatly reducing the size and weight of the equipment   High Efficiency Hands-free, collect as you go   Easy To Disassemble Minimalist design, easy disassembly and assembly, easy to use, assembly time is less than 1 minute   High Compatibility Compatible with a variety of GreenValley International products, supporting one-stop software solutions   Weather-Resistant Design With an IP54 protection rating, the LiGrip is rugged and resistant to rain and dust   High Precision Combine GNSS and LiDAR SLAM algorithms to obtain point cloud data with absolute coordinate positions   System parameters Size 760*500*270mm (Collapsed) 1100*500*270mm (Extended) Material Aluminum alloy + carbon fiber Weight 3.2kg Compatible with handheld models H300、H120、V100 Absolute accuracy ≤5cm * In areas without GPS or poor signal, it is recommended to use handheld mode

GREENVALLEY LiGrip H300 Backpack Kit   The GreenValley’s backpack kit is a versatile accessory designed for handheld 3D LiDAR SLAM systems. Featuring an ergonomic design for comfortable wear, it is lightweight and easy to assemble and disassemble. With an integrated GNSS antenna, it supports PPK and RTK (requires separate purchase of RTK module for H300 and H120) and directly outputs point cloud data with absolute positioning. This saves time and improves your operational efficiency. The integrated backpack frees up your hands, making work more comfortable and efficient. It is suitable for applications in surveying, forestry, stockpiles, powerline scanning, mining, and more.   Product Advantages   Light And Small Minimalist shape, greatly reducing the size and weight of the equipment   High Efficiency Hands-free, collect as you go   Easy To Disassemble Minimalist design, easy disassembly and assembly, easy to use, assembly time is less than 1 minute   High Compatibility Compatible with a variety of GreenValley International products, supporting one-stop software solutions   Weather-Resistant Design With an IP54 protection rating, the LiGrip is rugged and resistant to rain and dust   High Precision Combine GNSS and LiDAR SLAM algorithms to obtain point cloud data with absolute coordinate positions   System parameters Size 760*500*270mm (Collapsed) 1100*500*270mm (Extended) Material Aluminum alloy + carbon fiber Weight 3.2kg Compatible with handheld models H300、H120、V100 Absolute accuracy ≤5cm * In areas without GPS or poor signal, it is recommended to use handheld mode

GREENVALLEY LiGrip H120 +LiFuser     Rotierendes Handheld SLAM LiDAR System   Gewicht （inkl. Batterie）:1.5kg Relative Genauigkeit bis zu 3cm Absoute Genauigkeit  ≤5cm Lösung: SLAM-basiert Mehr Informationen weiter unten und in der Broschüre (siehe TAB neben Beschreibung)     Übersicht   Das LiGrip Rotating Handheld SLAM LiDAR System ist ein neuer tragbarer terrestrischer LiDAR-Scanner von GreenValley International. LiGrip ist eine neue Produktserie, die von GreenValley International eingeführt wurde. Das Produkt verfügt über ein einfaches, leichtes und kompaktes Gehäuse für bequeme und vielseitige Betriebsoptionen. Mit dem integrierten Velodyne VLP-16 Puck LiDAR-Sensor und der HD-Kamera ist LiGrip für viele branchenspezifische Projekte geeignet. Er unterstützt mehrere Plattformen und kombiniert LiDAR mit modernsten SLAM-Algorithmen, um selbst in den schwierigsten Umgebungen hochpräzise HD-Karten zu erstellen.   Leichtgewicht Minimalistisches Design mit einem Aluminiumgehäuse sorgt für ein leichtes und dennoch robustes Handheld-System.   Vielseitig Mit Zusatzoptionen, die eine Anpassung als UAV-, Fahrzeug- oder Rucksackhalterung ermöglichen, ist der LiGrip das bisher vielseitigste LiDAR-System von GreenValley.   Hochmoderner SLAM-Algorithmus Durch den Einsatz des branchenführenden SLAM-Algorithmus (Simultaneous Localization And Mapping) von GreenValley bietet LiGrip unterwegs eine genaue Positionierung in Echtzeit, während Sie Ihre Umgebung kartieren.   Mit GreenValley's selbst entwickelter LiFuser Punktwolkenverarbeitungssoftware können die Punktwolkendaten schnell nachbearbeitet werden.     Vorteile   Wetterbeständiges Design Mit einer Schutzart von IP54 ist der LiGrip robust und widerstandsfähig gegen Regen und Staub   Leichtes Gewicht Minimalistisches Design mit einem Aluminiumgehäuse sorgt für ein leichtes und dennoch robustes Handheld-System   Multiplattform Unterstützt Handgeräte, Rucksäcke, Fahrzeuge, Flugzeuge und andere Plattformen, um eine vollständige Abdeckung der Erfassungsanforderungen in verschiedenen Szenarien und zur weiteren Verbesserung der Betriebseffizienz   Multimodal Unterstützt zwei Betriebsarten: mobiles WIFI (All-in-One-Kit) und clientless (reiner Handheld-Betrieb), die je nach Betriebsumgebung flexibel die je nach Betriebsumgebung flexibel ausgewählt werden können   Anpassbar Äußerst anpassungsfähiges Design, das verschiedene modulare Integrationen ermöglicht und auf die Bedürfnisse der Benutzer zugeschnitten   Vielseitig Mit Zusatzoptionen, die Anpassungen als UAV-, Fahrzeug- oder Rucksackhalterung, ist der LiGrip das vielseitigste LiDAR-System von GreenValley bis heute   Hochmoderner SLAM-Algorithmus Durch den Einsatz von GreenValleys eigenem branchenführenden SLAM-Algorithmus (Simultaneous Localization And Mapping)-Algorithmus bietet LiGrip eine Echtzeit unterwegs genaue Positionierung, während Sie Ihre Umgebung kartieren   System Parameters Size L204mm×W130mm×H385mm Weight 1.74kg Battery Pack Size L134mm×W64.6mm×H167mm Voltage 15.2V Battery 5870mAh Storage 256GB SSD   IP Rating IP54 Connections USB, Ethernet Battery Life ~4h (per battery) Suitable Environments Indoor and outdoor scenarios   LiDAR Parameters Scan Rate 320,000pts/s Scan Range 120m   Camera Type 360 ° panoramic lens intergration Photo resolution 6080×3040（2：1） Data Format insv Video resolution 5760×2880@30fps Video coding H.264 / H.265 Size 72mm×48mm×43mm   Resulting Data Relative Accuracy ≤3cm* Absolute Accuracy 5cm Point Cloud Formats Las, Ply, LiData LiDAR Accuracy ±3cm FOV° 280°×360°

GREENVALLEY LiGrip H300 +LiFuser   Rotating Handheld SLAM LiDAR System   Key Features   300-Meter Scanning Range 640,000 pts/s Boasting a cutting-edge XT32M laser, the LiGrip H300 achieves a maximum range of 300 meters, and the scanning rate can reach 640,000 pts/s. 300-Meter Scanning Range 640,000 pts/s   Versatile Mapping Methods Choose from SLAM, RTK-SLAM, and PPK-SLAM for flexibility across a range of scenarios. RTK-SLAM: Ideal for areas with CORS signal coverage, allowing you to directly obtain precise point clouds with absolute coordinates. PPK-SLAM: In areas without CORS signal coverage, you can choose to set up a base station or use GreenValley's LiCloud to obtain point clouds with absolute coordinates. SLAM: Point clouds with absolute coordinates can be obtained through the integration of GCP control points (if point clouds without absolute coordinates are sufficient, direct data collection can be performed).   Multi-Platform Compatibility Use the handheld, backpack, vehicle-mounted, and drone-mounted to ensure comprehensive coverage and enhanced efficiency for different scene requirements.   Specifications   System Parameters Size L195mm×W125mm×H350mm Voltage 15.2V Battery Pack Size L134mm×W64.6mm×H167mm Storage 512GB Handheld Weight 1.67kg (Including Tripod and Camera)  Battery 5870mAh IP Code IP54 Single Battery Life 3h Port USB, Ethernet Continuous Scanning Duration up to 55 minutes Suitable Environments: Versatile for a wide range of indoor and outdoor applications   LiDAR Sensor Parameters Scan Rate 640,000 pts/s Scan Range Up to 300 meters Scanning Accuracy Up to 1cm FOV 280°×360°   Camera Parameters Camera Type INSTA ONE RS 1-inch Panoramic Camera Photo Resolution 6528x3264 Data Format MP4 INSV Video Resolution 6144x3072 Size L95mm×W60mm×H55mm (including heat dissipation structure) CMOS Size 1 inch   RTK Module * GNSS System GPS+BDS+Glonass+Galileo+QZSS, Supports 5 constellations and 16 frequencies RTK Accuracy 1cm+1ppm RTK/PPK Protocol NTRIP Size L97mm×W71mm×H30mm Weight 190g RTK Data Format .rtk GNSS Raw Data Format .log Compatibility RTK /PPK models support for LiGrip H300, and LiGrip H120 Mapping Method Mapping Principles RTK-SLAM, PPK-SLAM, SLAM Real-time Processing Supported Data Outcomes Relative Accuracy Up to 1cm Absolutely Accuracy ≤5cm Point Cloud Data Format Las, LiData "*" indicates that it needs to be purchased separately