WingtraOne Gen II
VTOL-Drone of the next generation
Größer kartieren, schneller kartieren, überall kartieren
Eine Kartierungsdrohne für großflächige Vermessungen mit unübertroffener Datenqualität zu einem Bruchteil der Zeit und Kosten.
Produktfeatures
Schneller kartieren
Die einzigartigen Funktionen des WingtraOne GEN II ermöglichen es Ihnen, Ihre Flugzeit zu minimieren und mehr Arbeit zu erledigen, sei es ein weiteres Projekt im Feld oder die Analyse Ihrer Daten im Büro.
Bis zu 8x schnell als Multicopter-Drohnen
Bis zu 2x schneller als Standard-Fixed-Wing-Drohnen
Effizienter Starrflügelflug
Fliegen Sie mit 16 m/s (36 mph) bis zu 59 Minuten pro Flug für eine große Abdeckung.
42 MP-Kamera
WingtraOne kann höher fliegen als Drohnen, die auf 20-MP-Kameras beschränkt sind, so dass Sie mit jedem Bild mehr Boden und mehr Details und einen größeren Bereich pro Flug erfassen.
Keine GCPs mehr, nur noch Kontrollpunkte
Mit einem hochpräzisen PPK-GNSS-Empfänger an Bord brauchen Sie keine Bodenkontrollpunkte (GCPs) mehr zu setzen. Verwenden Sie nur noch drei Kontrollpunkte, um die Qualität Ihrer Karte zu überprüfen.
Geringere Bildüberlappungen
Hochwertige Optik bedeutet, dass Sie Ihre Karte auch bei geringeren Überlappungen zuverlässig rekonstruieren können. Das bedeutet, dass pro Fluglinie mehr Neuland abgedeckt wird und die Abdeckung pro Flug maximal ist.
Kartieren Sie größer
Ob es sich um eine Autobahn, einen Industriekomplex oder ein Bergwerk handelt, Sie können jetzt große Projekte in Angriff nehmen, die bisher mit einer Drohne nicht zu kartieren waren. Und dafür brauchen Sie nur ein paar Stunden.
Wingtra One RX1R II
42MP Kamera
110 ha (272 ac)
Andere Starrflügler-Drohnen
20MP Kamera
70 ha (173 ac)
Multicopter-Drohnen
20 MP Kamera
8 ha (20 ac)
Kosten senken
Eine schnellere Datenerfassung und ein größerer Erfassungsbereich bedeuten, dass weniger Personen für weniger Zeit vor Ort sind, wodurch die mit der Datenerfassung verbundenen Personalkosten gesenkt werden.
Zeit und Kosten der Datenerfassung für einen Industriekomplex von 1.200 ha (3.000 acres):
WingtraOne
3 Tage
4500 US$
Multicopter-Drohnen
10 Tage
15.000 US$
Terrestrische Geräte
20 Tage
30.000 US$
Maximum availability
WingtraOne GEN II offers the most advanced reliability in survey drones. This is key to maximizing drone uptime, increasing your productivity and ensuring you deliver consistently.
One drone to map it all
The payload range now includes an oblique camera for the most detailed 3D reconstruction and an integrated PPK GNSS receiver for each camera, so you can take on a wider range of missions with centimeter-level accuracy.
Software for a smooth workflow
WingtraOne comes with a rugged tablet and a feature-rich, easy-to-use flight planning app, so you can have a successful data collection experience from day one.
Ready to fly in five minutes
The WingtraOne drone comes with a tablet with WingtraPilot, the built-in app for easy data collection management. The intuitive app offers several ways to prepare flight plans and monitor and review missions in flight.
5 minute setup
Take off in less than five minutes, including drone setup, all pre-flight steps, and planning a simple mapping mission.
Pre-flight checklist
WingtraPilot ensures the drone is fully functional before flight by performing background checks such as battery health, GPS reception, and test images.
Fully autonomous
Automated takeoff, in-flight data collection and landing without human interaction.
Manual takeover with in-app control
Take manual control of the drone at any time during landing. Use the intuitive controls on the tablet to adjust its position in the air and land safely.
Real-time monitoring
Displays information such as flight location, altitude and mission progress from up to 10 km (6 miles) away.
Intelligent voice
Provides you with comprehensive audio feedback during the mission.
Up to 59 minutes of flight time
The efficient fixed-wing flight mode allows WingtraOne to take on missions that last up to 59 minutes.
10 km telemetry range
Stay in touch with your drone over a direct range of up to 10 km (6 miles).
Remote ID ready
The WingtraOne GEN II is equipped with a WiFi module that ensures full compliance with existing and upcoming remote ID regulations.
2 x 2 m landing accuracy (6.6 x 6.6 ft).
WingtraOne lands exactly where it took off, allowing you to operate in tight spaces and increase the overall safety of your flight.
Sharp results in strong winds
Advanced wind control algorithms ensure stable data collection in sustained winds up to 12 m/s (27 mph) and gusts up to 18 m/s (40 mph).
GNSS receiver with four constellations
Redundant modules with GPS (L1, L2), GLONASS (L1, L2), Galileo (L1) and BeiDou (L1).
Altitude propeller
Optional propellers allow launch at altitudes up to 4800 m (15,700 ft) AMSL and data collection at altitudes up to 5000 m (16,400 ft) AMSL.
Corridor mapping
Fast, efficient coverage of long, narrow routes. For road construction or inspection; inspection of railroad tracks, pipelines, and power lines; and environmental research.
Stay confident even in difficult conditions
Developed in Switzerland, WingtraOne offers the highest quality standards and is used extensively in a variety of environments, from glaciers in Greenland to desert mines in Namibia.
Fly safely anywhere
WingtraOne can take off and land anywhere - even in tight spaces or rough terrain. This allows you to collect data where other drones can't. Plus, vertical landings mean no dirt to scratch your camera lens, and therefore longer equipment life.