DJI Matrice 4E Der Betrag deckt einen Leihzeitraum von 3 Tagen. Kein Akku in der Miete enthalten - separat mieten! Die DJI Matrice 4 Serie ist eine neue Generation von ...

DJI Matrice 4E Die DJI Matrice 4 Serie ist eine neue Generation von kleinen intelligenten Multi-Light-Flaggschiff-Drohnen für Unternehmen, die einen neuen Maßstab für int ...

DJI Matrice 4E Die DJI Matrice 4 Serie ist eine neue Generation von kleinen intelligenten Multi-Light-Flaggschiff-Drohnen für Unternehmen, die einen neuen Maßstab für int ...

DJI Matrice 4E Enterprise Vermessungsbundle (+ 3 Akkus + DJI D-RTK 3 + GCPs) Die DJI Matrice 4 Serie ist eine neue Generation von kleinen intelligenten Multi-Light-Flaggs ...

DJI Matrice 4E Die DJI Matrice 4 Serie ist eine neue Generation von kleinen intelligenten Multi-Light-Flaggschiff-Drohnen für Unternehmen, die einen neuen Maßstab für int ...

Informationen zum ausführlichen Test der L2 in unserem Blog-Beitrag. Der Zenmuse L2 zeichnet sich durch ein fortschrittliches LiDAR-Modul, den Livox AVIA aus, ein von DJI ...

DJI Matrice 350 RTK (inkl. 2 Years Care Basic) Die Matrice 350 RTK ist weit mehr als das Upgrade eines Flaggschiffs. Diese Drohnenplattform der nächste Generation wird wi ...

DJI Zenmuse P1 Der neue Standard für Vermessungen aus der Luft Die Zenmuse P1 umfasst einen Vollformat-Sensor mit austauschbaren Objektiven mit fester Brennweite auf ein ...

DJI M400 with up to 6 kg payload and 55 min flight time for surveying, inspection, AI, wildlife rescue, construction, energy, agriculture, RTK, lidar, thermal imaging

EMLID Reach RX2 - All-Band RTK GNSS Rover + PIX4Dcatch + Scanning Kit (Carrying Case + Scanning Handle)   The EMLID Reach RX2 is a compact GNSS rover with tilt compensation and support for all frequency bands. The RX2 maintains centimeter accuracy even at high tilt angles. This is perfect for local and state governments, urban planning, digital twins, water management, nature conservation, and many more.   The EMLID Reach RX2 Scanning Kit comprises a practical scanning handle with hand loop, a protective carrying case with EVA foam inlay and a 3 mm Allen key. The case also provides room for a phone case with SP Connect SPC+  (maximum size 6.9", e.g. case for iPhone 16 Pro Max) that can be used with the smartphone holder. The kit thus contains all the accessories needed to work comfortably with Reach RX2 and provides an integrated solution for PIX4Dcatch. The handle with attached Reach RX2 can be placed in left-handed or right-handed orientations.   PIX4Dcatch is a mobile 3D scanning app that creates precise 3D scans and point clouds by automatically capturing even the smallest details with real-time AR feedback. The 1-year license key is sent separately by email and includes 500 credits for cloud processing and online training. Please note: PIX4Dcatch is only compatible with iOS devices. Supported are all iPhones with iOS version 18.0 or higher, as well as iPad 11-inch (2nd gen and later) and iPad 12.9-inch (2nd gen and later) with iOS version 18.0 or higher (as of November 2025).   Tilt compensation The Reach RX2 introduces tilt compensation to the Reach RX series. This feature allows measurement of points with a tilted pole while maintaining centimetre-level accuracy even in challenging conditions. Its accuracy is specified as RTK + 2 mm + 0.3 mm/°. Initialisation time is significantly reduced compared to the RS3 due to an enhanced algorithm.   The tilt compensation mechanism performs well near large metal structures, vehicles, and electronics because the IMU chip inside does not rely on a magnetometer, making it immune to magnetic disturbances. Each unit is factory-calibrated individually, requiring no additional user calibration.   All-band support The RX2’s GNSS chip supports all current constellations and bands, including GPS L5, GLONASS, Galileo, Beidou-3, QZSS and NavIC with 672 channels available. It features a new, more powerful GNSS antenna for improved reception. Together, the chip and antenna enable the RX2 to work effectively even under tree canopies. The device supports RTK positioning via NTRIP, providing centimetre-level accuracy. Users simply connect to NTRIP, and the device handles the rest. Tilt compensation and the strong antenna ensure reliable accuracy in nearly any environment.   Light, robust and enduring Despite weighing less than a smartphone, the RX2 is durable and powerful. ● IP68 rating: water resistance in fresh water up to 1.5 meters depth for 30 minutes ● Provides up to 16 hours of operation on a single battery charge   Compatibility with iOS and Android With Apple MFi certification, RX2 connects natively and reliably to iPhones and iPads. It also works seamlessly with Android devices.   Ready for data collection and design layout Every RX2 comes with Emlid Flow, a user-friendly app for iOS and Android that assists with a variety of field tasks in areas such as construction, utilities, GIS and landscaping. All your data is instantly synced to the cloud, meaning your office team always has the latest updates.   Use Cases & Application Scenarios:   Designed to make high-precision positioning accessible even to non-professional users, the RX2 is suitable for many industries where accurate coordinates are needed but GNSS is not the primary tool. The RX2 is simple enough for newcomers to GNSS to get started, yet professional and reliable enough for demanding fieldwork. It can operate almost anywhere with an internet connection and access to an NTRIP service.   Compatible with Esri and other GIS apps The RX2 can significantly improve the accuracy of GIS applications. The RX2 fits perfectly into existing GIS workflows through integration with various GIS apps for iOS and Android. Chief among them are QField, Mergin Maps as well as ArcGIS Field Maps, Survey123, and QuickCapture from Esri.   Utility Utility operations often involve trenches and hard-to-reach areas, making compactness and tilt compensation especially valuable. When fitted with a handle and paired with a compatible scanning app, the RX2 can also be used for terrestrial scanning. Users can measure dimensions and volumes of excavated earth or efficiently monitor project progress.   Construction Everyday tasks such as staking fences, checking elevations, placing utility markers, and collecting site checkpoints can be handled by team members with no prior surveying experience using the RX2. The RX2 scales easily across teams thanks to its ease of use, reducing both training time and the risk of errors. The Emlid Flow software covers almost all construction workflows, from topography to layout, and provides tools for team collaboration.   Landscaping The RX2 delivers centimetre-level accuracy and simplicity, allowing users to work faster and make more informed decisions. Regardless of preexisting software, Emlid Flow enhances efficiency in topographic capture, design preparation, and layout tasks through its powerful field data collection and CAD integration features.   Terrestrial scanning The RX2 is compatible with PIX4Dcatch and other scanning apps to capture precise 3D models of buildings, surfaces, and hard-to-reach areas. These capabilities make it ideal for utility mapping, volume calculations, and as-built documentation.   Technical Specifications RX2:   Mechanical ● Dimensions: 172 x 51 x 51 mm ● Mount: 5/8”-11 UNC and quick release ● Weight: 280 g (0.62 lb) ● Operating temperature: -20 to +65 °C (-4 to 149 °F) ● Ingress protection: IP68 (maximum depth of 1.5 meters up to 30 minutes)   Electrical ● Autonomy: Up to 16 hrs ● Battery: Li-Ion 7000 mAh, 3.6 V, 25.2 Wh ● Charging: USB Type-C 5 V 2 A ● Certification: FCC, CE, IC, MFi   Positioning ● RTK accuracy: H: 7 mm + 1 ppm | V: 14 mm + 1 ppm ● Tilt accuracy: RTK + 2 mm + 0.3 mm/° ● Convergence time: ~5 s typically   Connectivity ● Communication interface: Bluetooth 4.2 (BR/EDR + LE) ● Ports: USB Type-C port   Data ● Input data format: RTCM3 ● Input data protocol: NTRIP ● Position data format: NMEA   GNSS ● Signal tracked: GPS: L1C/A, L2C, L5 GLONASS: L1OF, L2OF Galileo: E1-B/C, E5a, E6 BeiDou: B1I, B1C, B2a, B3I QZSS: L1C/A, L1C/B11, L2C, L5 NavIC: L1-SPS Data, L5-SPS ● Number of channels: 672 ● Update rates: 5 Hz   Case Specifications:       · Outer case material: shock-resistant EVA laminated with water-resistant polyester fabric.     · Dimensions: 365 x 210 x 95 (mm)     · Weight: 0.65 kg     · Handle can be placed in both left handed and right handed orientations

The EMLID Reach RX2 is a compact GNSS rover with tilt compensation and support for all frequency bands. The RX2 maintains centimeter accuracy even at high tilt angles. This is perfect for local and state governments, urban planning, digital twins, water management, nature conservation, and many more.   Tilt compensation The Reach RX2 introduces tilt compensation to the Reach RX series. This feature allows measurement of points with a tilted pole while maintaining centimetre-level accuracy even in challenging conditions. Its accuracy is specified as RTK + 2 mm + 0.3 mm/°. Initialisation time is significantly reduced compared to the RS3 due to an enhanced algorithm.   The tilt compensation mechanism performs well near large metal structures, vehicles, and electronics because the IMU chip inside does not rely on a magnetometer, making it immune to magnetic disturbances. Each unit is factory-calibrated individually, requiring no additional user calibration.   All-band support The RX2’s GNSS chip supports all current constellations and bands, including GPS L5, GLONASS, Galileo, Beidou-3, QZSS and NavIC with 672 channels available. It features a new, more powerful GNSS antenna for improved reception. Together, the chip and antenna enable the RX2 to work effectively even under tree canopies. The device supports RTK positioning via NTRIP, providing centimetre-level accuracy. Users simply connect to NTRIP, and the device handles the rest. Tilt compensation and the strong antenna ensure reliable accuracy in nearly any environment.   Light, robust and enduring Despite weighing less than a smartphone, the RX2 is durable and powerful. ● IP68 rating: water resistance in fresh water up to 1.5 meters depth for 30 minutes ● Provides up to 16 hours of operation on a single battery charge   Compatibility with iOS and Android With Apple MFi certification, RX2 connects natively and reliably to iPhones and iPads. It also works seamlessly with Android devices.   Ready for data collection and design layout Every RX2 comes with Emlid Flow, a user-friendly app for iOS and Android that assists with a variety of field tasks in areas such as construction, utilities, GIS and landscaping. All your data is instantly synced to the cloud, meaning your office team always has the latest updates.   Use Cases & Application Scenarios:   Designed to make high-precision positioning accessible even to non-professional users, the RX2 is suitable for many industries where accurate coordinates are needed but GNSS is not the primary tool. The RX2 is simple enough for newcomers to GNSS to get started, yet professional and reliable enough for demanding fieldwork. It can operate almost anywhere with an internet connection and access to an NTRIP service.   Compatible with Esri and other GIS apps The RX2 can significantly improve the accuracy of GIS applications. The RX2 fits perfectly into existing GIS workflows through integration with various GIS apps for iOS and Android. Chief among them are QField, Mergin Maps as well as ArcGIS Field Maps, Survey123, and QuickCapture from Esri.   Utility Utility operations often involve trenches and hard-to-reach areas, making compactness and tilt compensation especially valuable. When fitted with a handle and paired with a compatible scanning app, the RX2 can also be used for terrestrial scanning. Users can measure dimensions and volumes of excavated earth or efficiently monitor project progress.   Construction Everyday tasks such as staking fences, checking elevations, placing utility markers, and collecting site checkpoints can be handled by team members with no prior surveying experience using the RX2. The RX2 scales easily across teams thanks to its ease of use, reducing both training time and the risk of errors. The Emlid Flow software covers almost all construction workflows, from topography to layout, and provides tools for team collaboration.   Landscaping The RX2 delivers centimetre-level accuracy and simplicity, allowing users to work faster and make more informed decisions. Regardless of preexisting software, Emlid Flow enhances efficiency in topographic capture, design preparation, and layout tasks through its powerful field data collection and CAD integration features.   Terrestrial scanning The RX2 is compatible with PIX4Dcatch and other scanning apps to capture precise 3D models of buildings, surfaces, and hard-to-reach areas. These capabilities make it ideal for utility mapping, volume calculations, and as-built documentation.   Technical Specifications:   Mechanical ● Dimensions: 172 x 51 x 51 mm ● Mount: 5/8”-11 UNC and quick release ● Weight: 280 g (0.62 lb) ● Operating temperature: -20 to +65 °C (-4 to 149 °F) ● Ingress protection: IP68 (maximum depth of 1.5 meters up to 30 minutes)   Electrical ● Autonomy: Up to 16 hrs ● Battery: Li-Ion 7000 mAh, 3.6 V, 25.2 Wh ● Charging: USB Type-C 5 V 2 A ● Certification: FCC, CE, IC, MFi   Positioning ● RTK accuracy: H: 7 mm + 1 ppm | V: 14 mm + 1 ppm ● Tilt accuracy: RTK + 2 mm + 0.3 mm/° ● Convergence time: ~5 s typically   Connectivity ● Communication interface: Bluetooth 4.2 (BR/EDR + LE) ● Ports: USB Type-C port   Data ● Input data format: RTCM3 ● Input data protocol: NTRIP ● Position data format: NMEA   GNSS ● Signal tracked: GPS: L1C/A, L2C, L5 GLONASS: L1OF, L2OF Galileo: E1-B/C, E5a, E6 BeiDou: B1I, B1C, B2a, B3I QZSS: L1C/A, L1C/B11, L2C, L5 NavIC: L1-SPS Data, L5-SPS ● Number of channels: 672 ● Update rates: 5 Hz

EMLID Reach RX2 All-Band RTK GNSS Rover with Scanning Kit (Carrying Case + Scanning Handle)   The EMLID Reach RX2 is a compact GNSS rover with tilt compensation and support for all frequency bands. The RX2 maintains centimeter accuracy even at high tilt angles. This is perfect for local and state governments, urban planning, digital twins, water management, nature conservation, and many more.   The EMLID Reach RX2 Scanning Kit comprises a practical scanning handle with hand loop, a protective carrying case with EVA foam inlay and a 3 mm Allen key. The case also provides room for a phone case with SP Connect SPC+  (maximum size 6.9", e.g. case for iPhone 16 Pro Max) that can be used with the smartphone holder. The kit thus contains all the accessories needed to work comfortably with Reach RX2 and provides an integrated solution for PIX4Dcatch. The handle with attached Reach RX2 can be placed in left-handed or right-handed orientations.   Tilt compensation The Reach RX2 introduces tilt compensation to the Reach RX series. This feature allows measurement of points with a tilted pole while maintaining centimetre-level accuracy even in challenging conditions. Its accuracy is specified as RTK + 2 mm + 0.3 mm/°. Initialisation time is significantly reduced compared to the RS3 due to an enhanced algorithm.   The tilt compensation mechanism performs well near large metal structures, vehicles, and electronics because the IMU chip inside does not rely on a magnetometer, making it immune to magnetic disturbances. Each unit is factory-calibrated individually, requiring no additional user calibration.   All-band support The RX2’s GNSS chip supports all current constellations and bands, including GPS L5, GLONASS, Galileo, Beidou-3, QZSS and NavIC with 672 channels available. It features a new, more powerful GNSS antenna for improved reception. Together, the chip and antenna enable the RX2 to work effectively even under tree canopies. The device supports RTK positioning via NTRIP, providing centimetre-level accuracy. Users simply connect to NTRIP, and the device handles the rest. Tilt compensation and the strong antenna ensure reliable accuracy in nearly any environment.   Light, robust and enduring Despite weighing less than a smartphone, the RX2 is durable and powerful. ● IP68 rating: water resistance in fresh water up to 1.5 meters depth for 30 minutes ● Provides up to 16 hours of operation on a single battery charge   Compatibility with iOS and Android With Apple MFi certification, RX2 connects natively and reliably to iPhones and iPads. It also works seamlessly with Android devices.   Ready for data collection and design layout Every RX2 comes with Emlid Flow, a user-friendly app for iOS and Android that assists with a variety of field tasks in areas such as construction, utilities, GIS and landscaping. All your data is instantly synced to the cloud, meaning your office team always has the latest updates.   Use Cases & Application Scenarios:   Designed to make high-precision positioning accessible even to non-professional users, the RX2 is suitable for many industries where accurate coordinates are needed but GNSS is not the primary tool. The RX2 is simple enough for newcomers to GNSS to get started, yet professional and reliable enough for demanding fieldwork. It can operate almost anywhere with an internet connection and access to an NTRIP service.   Compatible with Esri and other GIS apps The RX2 can significantly improve the accuracy of GIS applications. The RX2 fits perfectly into existing GIS workflows through integration with various GIS apps for iOS and Android. Chief among them are QField, Mergin Maps as well as ArcGIS Field Maps, Survey123, and QuickCapture from Esri.   Utility Utility operations often involve trenches and hard-to-reach areas, making compactness and tilt compensation especially valuable. When fitted with a handle and paired with a compatible scanning app, the RX2 can also be used for terrestrial scanning. Users can measure dimensions and volumes of excavated earth or efficiently monitor project progress.   Construction Everyday tasks such as staking fences, checking elevations, placing utility markers, and collecting site checkpoints can be handled by team members with no prior surveying experience using the RX2. The RX2 scales easily across teams thanks to its ease of use, reducing both training time and the risk of errors. The Emlid Flow software covers almost all construction workflows, from topography to layout, and provides tools for team collaboration.   Landscaping The RX2 delivers centimetre-level accuracy and simplicity, allowing users to work faster and make more informed decisions. Regardless of preexisting software, Emlid Flow enhances efficiency in topographic capture, design preparation, and layout tasks through its powerful field data collection and CAD integration features.   Terrestrial scanning The RX2 is compatible with PIX4Dcatch and other scanning apps to capture precise 3D models of buildings, surfaces, and hard-to-reach areas. These capabilities make it ideal for utility mapping, volume calculations, and as-built documentation.   Technical Specifications RX2:   Mechanical ● Dimensions: 172 x 51 x 51 mm ● Mount: 5/8”-11 UNC and quick release ● Weight: 280 g (0.62 lb) ● Operating temperature: -20 to +65 °C (-4 to 149 °F) ● Ingress protection: IP68 (maximum depth of 1.5 meters up to 30 minutes)   Electrical ● Autonomy: Up to 16 hrs ● Battery: Li-Ion 7000 mAh, 3.6 V, 25.2 Wh ● Charging: USB Type-C 5 V 2 A ● Certification: FCC, CE, IC, MFi   Positioning ● RTK accuracy: H: 7 mm + 1 ppm | V: 14 mm + 1 ppm ● Tilt accuracy: RTK + 2 mm + 0.3 mm/° ● Convergence time: ~5 s typically   Connectivity ● Communication interface: Bluetooth 4.2 (BR/EDR + LE) ● Ports: USB Type-C port   Data ● Input data format: RTCM3 ● Input data protocol: NTRIP ● Position data format: NMEA   GNSS ● Signal tracked: GPS: L1C/A, L2C, L5 GLONASS: L1OF, L2OF Galileo: E1-B/C, E5a, E6 BeiDou: B1I, B1C, B2a, B3I QZSS: L1C/A, L1C/B11, L2C, L5 NavIC: L1-SPS Data, L5-SPS ● Number of channels: 672 ● Update rates: 5 Hz   Case Specifications:       · Outer case material: shock-resistant EVA laminated with water-resistant polyester fabric.     · Dimensions: 365 x 210 x 95 (mm)     · Weight: 0.65 kg     · Handle can be placed in both left handed and right handed orientations

DJI Zenmuse L3 Long-Range LiDAR System with Highest Accuracy   The DJI Zenmuse L3 is a state-of-the-art, next-generation aerial LiDAR system delivering exceptional range and accuracy. Its 1535 nm LiDAR sensor reaches up to 950 meters even on targets with only 10% reflectivity. Dual 100-megapixel RGB mapping cameras and a high-precision Position and Orientation System (POS) accelerate geospatial data acquisition, enabling daily coverage of up to 100 km².   1535 nm Long-Range LiDAR: Extended Range, Broad Coverage The Zenmuse L3 achieves a maximum detection range of 950 meters at 100 kHz pulse frequency under 100 klx ambient light and 10% reflectivity. The adjustable pulse frequency provides flexible power output, optimizing performance for various operational scenarios. Typical flight altitudes between 300 and 500 meters increase coverage per flight and significantly improve mapping efficiency.   Small Measurement Point, High Pulse Energy With a laser beam divergence of only 0.25 mrad (1/e²), the laser footprint diameter at distance is about one-fifth that of the Zenmuse L2. This enables clear detection of smaller objects such as power lines or branches. The higher energy density improves penetration, increases ground point density, and allows precise reconstruction of complex terrain.   High Pulse Repetition Rate, Multiple Returns With up to 2 million pulses per second and support for up to 16 returns, the Zenmuse L3 delivers accurate 3D spatial reconstructions. Point density and penetration level can be flexibly adapted to meet specific application requirements.   Flexible Scanning Modes The system supports linear, star-shaped, and non-repetitive scanning modes for various applications:      · Linear: uniform point cloud distribution for precise terrain modeling     · Star-shaped: balances accuracy with high penetration, ideal for forests or urban areas     · Non-repetitive: wide scan angle and extensive coverage, optimized for powerline and structural inspections   Dual 100 MP RGB Camera System Equipped with two 100 MP 4/3 CMOS sensors and mechanical shutters, the L3 significantly improves accuracy and efficiency. Pixel binning supports an effective resolution of 25 MP with larger pixels, ensuring vivid colors even in low-light conditions.   107° Ultra-Wide Field of View The dual RGB cameras offer up to 107° horizontal field of view, capturing a larger area per image. Even with 20% LiDAR overlap, digital orthophoto maps (DOM) and digital elevation models (DEM) can be acquired simultaneously in a single flight, greatly boosting productivity.   Accuracy Meets Efficiency The enhanced Position and Orientation System (POS) achieves post-processing accuracy of 0.02° yaw and 0.01° pitch. The LiDAR offers ranging repeatability of 5 mm at 150 m and microsecond timing for highly precise results. Vertical accuracy is under 3 cm at 120 m altitude, under 5 cm at 300 m, and under 10 cm at 500 m suitable for mapping scales from 1:500 to 1:2000. With a ground sample distance (GSD) of 3 cm at 300 m altitude, the L3 enables precise mapping even without ground control points (GCP).   High Point Density, Strong Penetration & High Efficiency Thanks to smaller laser footprints and higher pulse energy, the L3 captures significantly more ground points beneath vegetation, enhancing detail, accuracy, and model completeness. Combined with the DJI Matrice 400, the Zenmuse L3 covers up to 10 km² per flight and up to 100 km² daily. Multiple data types, such as point clouds, orthophotos, and 3D models, can be collected in a single mission.   DJI Terra Integration: PPK, LiDAR Gaussian Splatting & Fusion-Based Modeling DJI Terra provides integrated PPK (Post-Processed Kinematic) data processing for centimeter-level positioning accuracy, even without RTK availability. The software supports local PPK processing for RGB imagery and LiDAR data. Advanced Gaussian Splatting technology produces highly detailed and realistic 3D models. Fusion of LiDAR and RGB data in a single dataset enables simultaneous generation of high-accuracy point clouds, 2D maps, and 3D mesh models. This data fusion approach improves model completeness, especially for complex structures, meeting the needs of energy, transportation, and infrastructure sectors.   Integrated End-to-End Solution The L3 works seamlessly within the DJI ecosystem from data capture and PPK post-processing in DJI Terra to cloud analysis in DJI FlightHub 2. Real-time point cloud previews, live measurements, and flexible split-screen views increase mission efficiency and safety.   Secure Data Processing CFexpress card encryption and AES-256 video transmission encryption protect sensitive data. The Matrice 400 also supports one-click log clearing for added security.   Typical Applications Topographic surveying, civil and geotechnical engineering, geological studies and hazard mapping, forestry and vegetation analysis, energy and powerline inspections, mining and infrastructure surveying.   Please note: The DJI Zenmuse L3 is only compatible with the DJI Matrice 400 due to the payload weight of 1.6 kg, the new gimbal bracket with anti-drop gimbal rails, and the higher power consumption of the 1535 nm laser.

The GreenValley LiGrip O2 is a state-of-the-art, portable SLAM LiDAR 3D scanning system that integrates laser scanning, triple panoramic cameras, dual visual SLAM cameras, and a GNSS antenna in one device. This all-in-one system enables precise and comprehensive data acquisition in any environment and at any time of day without limitations.   The GREENVALLEY LiGrip O2 is available in three variants: with 16 channels and a 120 m range, with 32 channels and a 120 m range, and with 32 channels and a 300 m range, differing in scan performance and measuring range to cover various application requirements.   Thanks to the triple panoramic camera coverage, a complete 3D capture from different angles is possible, simplifying data acquisition and improving color accuracy as well as the quality of the 3D point clouds. The two visual SLAM cameras provide stable mapping even in areas with few distinctive features, such as tunnels or underground spaces.   The device operates with a proprietary multi-sensor fusion SLAM technology that ensures an absolute positioning accuracy of under 3 cm and a repeatability of under 2 cm, regardless of operator, path, environment, or time. The output consists of highly detailed 3D point clouds with a point spacing density of 2 mm, comparable to terrestrial laser scanning.   Several positioning modes are available to use the scanner flexibly in various work environments, including RTK-SLAM for areas with RTK signal, PPK-SLAM for environments without RTK signal, MLF-SLAM for open and low-feature environments, and SLAM for GNSS-denied environments. In addition to handheld use, various other carrying options with separately available accessories (backpack, frontpack, telescopic pole, vehicle or drone mounting) allow individual adaptation to the application scenario.   Technical Specifications LiGrip O2       · Absolute accuracy: < 3 cm     · Relative accuracy: < 1 cm     · Repeatability: < 2 cm     · Protection class: IP64     · Storage: 512 GB SSD     · Ports: USB Type-C     · Horizontal and vertical tilt: < 0.015°     · Control: App and button operation     · Scan rate: Up to 640,000 points per second     · Detection range: up to 120 m (XT16/XT32) / 300 m (XT32M2X)     · Weight: approx. 2.2 kg (with base unit and battery)     · Firmware update: offline possible     · Battery life (single battery): 120 minutes     · Operating temperature range: -20 °C to 40 °C     · Device storage temperature: -40 °C to 70 °C     · Battery storage temperature: recommended 22 °C to 30 °C   LiDAR Sensor Parameters       · Supported laser models: XT16, XT32, XT32M2X     · Laser wavelength: 905 nm     · Scan rate: 320,000 or 640,000 points per second     · Maximum detection range: 120 m (XT16/XT32), 300 m (XT32M2X)     · Field of view: 280° horizontal × 360° vertical     · LiDAR accuracy: 0.5 cm     · Safety class: Class 1 (eye-safe)   Camera Parameters       · Number of cameras: 5     · Panoramic cameras: 3 × 12 MP     · Visual SLAM cameras: 2 × 1.3 MP     · Frame rate: adjustable   IMU (Inertial Measurement Unit)       · Output frequency: 200 Hz     · Post-processing position accuracy: horizontal 0.005 m, vertical 0.01 m     · Post-processing attitude accuracy: roll/pitch 0.003°, heading 0.01°   Mapping Methods       · MLF-SLAM, PPK-SLAM, RTK-SLAM, SLAM     · Real-time processing and real-time colorization supported   Output Formats       · Colored point clouds: LAS, LiDATA     · Panoramic images: Imglist + JPG     · Mesh: LOD-OSGB     · Gaussian splatting: lisplat, ply   Accessories and Options   Telescopic Pole Adapter:     · Weight: 300 g     · Supported pole diameter: 25 - 25.5 mm     · Compatibility: LiGrip O series (including O1 Lite and O2 Lite)   Frontpack Kit Weight: 2.1 kg   Frontpack Kit Dimensions: 560 × 340 × 160 mm   Backpack Kit Weight: 3.9 kg   Backpack Kit Dimensions: 580 × 303 × 145 mm   Dual battery and hot swap supported   Backpack Kit Compatibility: LiGrip O2 series

The GreenValley LiGrip O2 is a state-of-the-art, portable SLAM LiDAR 3D scanning system that integrates laser scanning, triple panoramic cameras, dual visual SLAM cameras, and a GNSS antenna in one device. This all-in-one system enables precise and comprehensive data acquisition in any environment and at any time of day without limitations.   The GREENVALLEY LiGrip O2 is available in three variants: with 16 channels and a 120 m range, with 32 channels and a 120 m range, and with 32 channels and a 300 m range, differing in scan performance and measuring range to cover various application requirements.   Thanks to the triple panoramic camera coverage, a complete 3D capture from different angles is possible, simplifying data acquisition and improving color accuracy as well as the quality of the 3D point clouds. The two visual SLAM cameras provide stable mapping even in areas with few distinctive features, such as tunnels or underground spaces.   The device operates with a proprietary multi-sensor fusion SLAM technology that ensures an absolute positioning accuracy of under 3 cm and a repeatability of under 2 cm, regardless of operator, path, environment, or time. The output consists of highly detailed 3D point clouds with a point spacing density of 2 mm, comparable to terrestrial laser scanning.   Several positioning modes are available to use the scanner flexibly in various work environments, including RTK-SLAM for areas with RTK signal, PPK-SLAM for environments without RTK signal, MLF-SLAM for open and low-feature environments, and SLAM for GNSS-denied environments. In addition to handheld use, various other carrying options with separately available accessories (backpack, frontpack, telescopic pole, vehicle or drone mounting) allow individual adaptation to the application scenario.   Technical Specifications LiGrip O2       · Absolute accuracy: < 3 cm     · Relative accuracy: < 1 cm     · Repeatability: < 2 cm     · Protection class: IP64     · Storage: 512 GB SSD     · Ports: USB Type-C     · Horizontal and vertical tilt: < 0.015°     · Control: App and button operation     · Scan rate: Up to 640,000 points per second     · Detection range: up to 120 m (XT16/XT32) / 300 m (XT32M2X)     · Weight: approx. 2.2 kg (with base unit and battery)     · Firmware update: offline possible     · Battery life (single battery): 120 minutes     · Operating temperature range: -20 °C to 40 °C     · Device storage temperature: -40 °C to 70 °C     · Battery storage temperature: recommended 22 °C to 30 °C   LiDAR Sensor Parameters       · Supported laser models: XT16, XT32, XT32M2X     · Laser wavelength: 905 nm     · Scan rate: 320,000 or 640,000 points per second     · Maximum detection range: 120 m (XT16/XT32), 300 m (XT32M2X)     · Field of view: 280° horizontal × 360° vertical     · LiDAR accuracy: 0.5 cm     · Safety class: Class 1 (eye-safe)   Camera Parameters       · Number of cameras: 5     · Panoramic cameras: 3 × 12 MP     · Visual SLAM cameras: 2 × 1.3 MP     · Frame rate: adjustable   IMU (Inertial Measurement Unit)       · Output frequency: 200 Hz     · Post-processing position accuracy: horizontal 0.005 m, vertical 0.01 m     · Post-processing attitude accuracy: roll/pitch 0.003°, heading 0.01°   Mapping Methods       · MLF-SLAM, PPK-SLAM, RTK-SLAM, SLAM     · Real-time processing and real-time colorization supported   Output Formats       · Colored point clouds: LAS, LiDATA     · Panoramic images: Imglist + JPG     · Mesh: LOD-OSGB     · Gaussian splatting: lisplat, ply   Accessories and Options   Telescopic Pole Adapter:     · Weight: 300 g     · Supported pole diameter: 25 - 25.5 mm     · Compatibility: LiGrip O series (including O1 Lite and O2 Lite)   Frontpack Kit Weight: 2.1 kg   Frontpack Kit Dimensions: 560 × 340 × 160 mm   Backpack Kit Weight: 3.9 kg   Backpack Kit Dimensions: 580 × 303 × 145 mm   Dual battery and hot swap supported   Backpack Kit Compatibility: LiGrip O2 series

The GreenValley LiGrip O2 is a state-of-the-art, portable SLAM LiDAR 3D scanning system that integrates laser scanning, triple panoramic cameras, dual visual SLAM cameras, and a GNSS antenna in one device. This all-in-one system enables precise and comprehensive data acquisition in any environment and at any time of day without limitations.   The GREENVALLEY LiGrip O2 is available in three variants: with 16 channels and a 120 m range, with 32 channels and a 120 m range, and with 32 channels and a 300 m range, differing in scan performance and measuring range to cover various application requirements.   Thanks to the triple panoramic camera coverage, a complete 3D capture from different angles is possible, simplifying data acquisition and improving color accuracy as well as the quality of the 3D point clouds. The two visual SLAM cameras provide stable mapping even in areas with few distinctive features, such as tunnels or underground spaces.   The device operates with a proprietary multi-sensor fusion SLAM technology that ensures an absolute positioning accuracy of under 3 cm and a repeatability of under 2 cm, regardless of operator, path, environment, or time. The output consists of highly detailed 3D point clouds with a point spacing density of 2 mm, comparable to terrestrial laser scanning.   Several positioning modes are available to use the scanner flexibly in various work environments, including RTK-SLAM for areas with RTK signal, PPK-SLAM for environments without RTK signal, MLF-SLAM for open and low-feature environments, and SLAM for GNSS-denied environments. In addition to handheld use, various other carrying options with separately available accessories (backpack, frontpack, telescopic pole, vehicle or drone mounting) allow individual adaptation to the application scenario.   Technical Specifications LiGrip O2       · Absolute accuracy: < 3 cm     · Relative accuracy: < 1 cm     · Repeatability: < 2 cm     · Protection class: IP64     · Storage: 512 GB SSD     · Ports: USB Type-C     · Horizontal and vertical tilt: < 0.015°     · Control: App and button operation     · Scan rate: Up to 640,000 points per second     · Detection range: up to 120 m (XT16/XT32) / 300 m (XT32M2X)     · Weight: approx. 2.2 kg (with base unit and battery)     · Firmware update: offline possible     · Battery life (single battery): 120 minutes     · Operating temperature range: -20 °C to 40 °C     · Device storage temperature: -40 °C to 70 °C     · Battery storage temperature: recommended 22 °C to 30 °C   LiDAR Sensor Parameters       · Supported laser models: XT16, XT32, XT32M2X     · Laser wavelength: 905 nm     · Scan rate: 320,000 or 640,000 points per second     · Maximum detection range: 120 m (XT16/XT32), 300 m (XT32M2X)     · Field of view: 280° horizontal × 360° vertical     · LiDAR accuracy: 0.5 cm     · Safety class: Class 1 (eye-safe)   Camera Parameters       · Number of cameras: 5     · Panoramic cameras: 3 × 12 MP     · Visual SLAM cameras: 2 × 1.3 MP     · Frame rate: adjustable   IMU (Inertial Measurement Unit)       · Output frequency: 200 Hz     · Post-processing position accuracy: horizontal 0.005 m, vertical 0.01 m     · Post-processing attitude accuracy: roll/pitch 0.003°, heading 0.01°   Mapping Methods       · MLF-SLAM, PPK-SLAM, RTK-SLAM, SLAM     · Real-time processing and real-time colorization supported   Output Formats       · Colored point clouds: LAS, LiDATA     · Panoramic images: Imglist + JPG     · Mesh: LOD-OSGB     · Gaussian splatting: lisplat, ply   Accessories and Options   Telescopic Pole Adapter:     · Weight: 300 g     · Supported pole diameter: 25 - 25.5 mm     · Compatibility: LiGrip O series (including O1 Lite and O2 Lite)   Frontpack Kit Weight: 2.1 kg   Frontpack Kit Dimensions: 560 × 340 × 160 mm   Backpack Kit Weight: 3.9 kg   Backpack Kit Dimensions: 580 × 303 × 145 mm   Dual battery and hot swap supported   Backpack Kit Compatibility: LiGrip O2 series

Weatherproof, vehicle-mountable drone hangar with robust IP56 protection from -30 to 50 °C for flexible operations with DJI Matrice 4D/4TD

Weatherproof, vehicle-mountable drone hangar with robust IP56 protection from -30 to 50 °C for flexible operations with DJI Matrice 4D/4TD

Weatherproof, vehicle-mountable drone hangar with robust IP56 protection from -30 to 50 °C for flexible operations with DJI Matrice 4D/4TD

Weatherproof, vehicle-mountable drone hangar with robust IP56 protection from -30 to 50 °C for flexible operations with DJI Matrice 4D/4TD

Weatherproof, vehicle-mountable drone hangar with robust IP56 protection from -30 to 50 °C for flexible operations with DJI Matrice 4D/4TD

Weatherproof, vehicle-mountable drone hangar with robust IP56 protection from -30 to 50 °C for flexible operations with DJI Matrice 4D/4TD

Weatherproof, vehicle-mountable drone hangar with robust IP56 protection from -30 to 50 °C for flexible operations with DJI Matrice 4D/4TD

Weatherproof, vehicle-mountable drone hangar with robust IP56 protection from -30 to 50 °C for flexible operations with DJI Matrice 4D/4TD

EMLID Reach RS4 Base and Rover Kit (RS4 Pro + RS4 + many Accessories)   A powerful RTK set: the Reach RS4 base and the Reach RS4 Pro rover.   Build a powerful RTK GNSS setup with this versatile kit. Use the RS4 as a fixed base station and pair it with the RS4 Pro, which is equipped with dual cameras, as your rover. Together, they provide accurate positioning and effortless stakeout, making them ideal for surveying, mapping and advanced fieldwork.

The EMLID Reach RS4 is an all-band RTK GNSS receiver with tilt compensation (IMU) that maintains ultimate precision even in challenging conditions and under dense tree canopies. It offers RTK accuracy of 7 mm + 1 ppm, and with tilt compensation achieves 2 mm + 0.3 mm/° precision. Operating as both base and rover, it supports 915 MHz LoRa and 450 MHz UHF NTRIP communication.   Powered by a Li_Ion battery, the RS4 runs up to 16 hours on a single charge, with USB Type_C charging available. Its magnesium alloy body, IP68 dust_ and waterproof rating, and wide operating temperature range from _40 °C to +65 °C make it ideal for harsh field conditions.   High Accuracy With 672 channels, the EMLID Reach RS4 can track 40+ satellites at a time from all major constellations (GPS, GLONASS, Galileo, BeiDou, QZSS, and NavIC). With support for L1, L2, and the lower L5 and L6 band frequencies, it ensures strong multipath resistance and reliable signal reception. The Reach RS4 thus delivers reliable performance and centimeter-level accuracy with 7 mm + 1 ppm precision in RTK mode. The receiver achieves a fixed RTK solution in less than 5 seconds, providing fast and dependable positioning in the field.   Next-gen tilt compensation The Reach RS4 comes factory_calibrated, ensuring instant readiness with no need for field adjustments. Its tilt compensation works reliably under all conditions and is immune to magnetic interference, maintaining accuracy even near metal objects. With faster initialisation and no angle limit, it provides precise measurements even at steep tilts. The compensation mechanism activates with just a few moves and remains stable throughout the survey, saving time and avoiding the need for recalibration.   Base and rover The Reach RS4 can operate as both base and rover, supporting RTK work with VRS or a single baseline CORS network in RTCM3 format.  You can also connect another GNSS receiver as an NTRIP base using EMLID NTRIP Caster.  It features a dual_band radio system:      · UHF 450 MHz for transmit and receive, with up to 2 W output (may require a license), compatible with Reach and 3rd_party receivers that support TRIMTALK 450S.      · LoRa 915 MHz for transmit and receive, with up to 1 W output (license_free in North America), compatible with Reach receivers.   Built to perform in extreme conditions The Reach RS4's magnesium alloy body is both light and exceptionally durable, similar to materials used in aerospace and high-end electronics. This combination ensures strength and ease of handling, even in the toughest environments. With up to 16 hours of continuous operation on a single charge, the RS4 is designed for long field days. It can be recharged via USB-C or powered by a portable power bank for added flexibility.   Thanks to its IP68 rating, the receiver is completely dustproof and waterproof, continuing to operate reliably in rain, snow, or dusty construction sites. Operating temperatures range from -40°C to +65°C, ensuring consistent performance in both extreme cold and intense heat.   Software for every stage of your project The Reach RS4 includes EMLID Flow, a complete mobile and cloud-based solution compatible with iOS and Android. It keeps your team coordinated and your projects running smoothly while supporting all essential site tasks.   With EMLID Flow, you can coordinate your team by inviting members, sharing projects, and managing access. Monitor field progress directly from the office and exchange data in real time with automatic synchronisation. The unified workflow ensures consistent data, a familiar interface, and no need for additional training.   On site, EMLID Flow enables you to carry out key surveying tasks efficiently:       · Topographic surveys for precise terrain and elevation data     · Stakeout and layout operations for placing points, lines, and markers     · Line and road surveys for staking centerlines and offsets     · Cut and fill calculations for measuring earthworks and stockpiles     · As-built verification to ensure structures match design plans   Technical Specifications:    Mechanical     ·  Dimensions: 128.6 x 128.6 x 99.3 mm     ·  Weight: 920 g (2.028 lb)     ·  Operating temperature: -40 to +65 °C     ·  Ingress protection: IP68    Electrical     ·  Autonomy: 16 hrs as RTK rover with tilt     ·  Battery: Li-Ion 5000 mAh, 7.2 V, 36 Wh     ·  Charging: USB Type-C (PD): 5V—3A, 9V—3A, 12V—3A, 15V—3A    Positioning     ·  Static: H: 4 mm + 0.5 ppm | V: 8 mm + 1 ppm     ·  PPK: H: 5 mm + 0.5 ppm | V: 10 mm + 1 ppm     ·  RTK: H: 7 mm + 1 ppm | V: 14 mm + 1 ppm     ·  Tilt compensation: RTK + 2 mm + 0.3 mm/°     ·  Convergence time: ~5 s typically    Connectivity     ·  LoRa radio: up to 1W     ·  Frequency range: 868/915 MHz     ·  Power: 0.1 W     ·  Distance: Up to 8 km     ·  UHF radio: up to 2W     ·  Frequency range: 410 - 470 MHz     ·  Protocols: TRIMTALK 450S     ·  Modulation type: GMSK     ·  LTE modem     ·  Regions: Global     ·  Bands: FDD-LTE: 1, 2, 3, 4, 5, 7, 8, 12, 13, 18, 19, 20, 26, 28 TD-LTE: 38, 39, 40, 41 UMTS (UHPS/FDD): 1, 2, 5, 8 Quad-band, 850/1900, 900/1800 MHz     ·  SIM card: Nano-SIM     ·  Wi-Fi: 802.11 b/g/n     ·  Bluetooth: Bluetooth 5.1 (BR/EDR + LE)     ·  Ports: RS-232, USB Type-C  *Use the correct antenna, LoRa or UHF, for your setup    Data protocols     ·  Corrections: NTRIP, RTCM3     ·  Position output: NMEA, LLH/XYZ     ·  Data logging: RINEX, NMEA, LLH/XYZ, UBX     ·  Internal storage: 16 GB    GNSS     ·  Signal tracked: GPS: L1C/A, L2C, L5, GLONASS: L1OF, L2OF, Galileo: E1-B/C, E5a, E6, BeiDou: B1I, B1C, B2a, B3I, QZSS: L1C/A, L1C/B11, L2C, L5, NavIC: L1-SPS Data, L5-SPS     ·  Number of channels: 672     ·  Update rates: up to 10 Hz

The EMLID Reach RS4 Pro is an all-band RTK GNSS receiver with dual cameras for visual stakeout and remote point capture for faster and safer work. It also features tilt compensation (IMU) that maintains ultimate precision even in challenging conditions and under dense tree canopies. It offers RTK accuracy of 7 mm + 1 ppm, and with tilt compensation achieves 2 mm + 0.3 mm/° precision. Operating as both base and rover, it supports 915 MHz LoRa and 450 MHz UHF NTRIP communication.   Powered by a Li_Ion battery, the RS4 Pro runs up to 16 hours on a single charge, with USB Type_C charging available. Its magnesium alloy body, IP68 dust_ and waterproof rating, and wide operating temperature range from _40 °C to +65 °C make it ideal for harsh field conditions.   Discover the new way to survey with dual cameras The Reach RS4 Pro introduces a new way to survey with its dual Full HD cameras, extending capabilities beyond traditional RTK. Stakeout is faster and more intuitive with AR guidance, as your design is overlaid directly on the real world, showing exactly where to place stakes rather than just following a map. Features like dynamic navigation, auto bullseye view, cut & fill indicators, and quick point switching help crews work more efficiently, even on complex construction sites and roadworks.   The RS4 Pro also enables measurement from images, allowing you to capture data from locations where you cannot place the survey pole. Building facades, areas behind fences, across busy roads, over water, past hedges, above pits, and around machinery can all be measured without physical access. This eliminates the need to set up a total station for such tasks and helps avoid hazardous areas.   Unmatched Precision With 672 channels, the EMLID Reach RS4 Pro can track 40+ satellites at a time from all major constellations (GPS, GLONASS, Galileo, BeiDou, QZSS, and NavIC). With support for L1, L2, and the lower L5 and L6 band frequencies, it ensures strong multipath resistance and reliable signal reception. The Reach RS4 Pro thus delivers reliable performance and centimeter-level accuracy with 7 mm + 1 ppm precision in RTK mode. The receiver achieves a fixed RTK solution in less than 5 seconds, providing fast and dependable positioning in the field.   Next-gen tilt compensation The Reach RS4 Pro comes factory_calibrated, ensuring instant readiness with no need for field adjustments. Its tilt compensation works reliably under all conditions and is immune to magnetic interference, maintaining accuracy even near metal objects. With faster initialisation and no angle limit, it provides precise measurements even at steep tilts. The compensation mechanism activates with just a few moves and remains stable throughout the survey, saving time and avoiding the need for recalibration.   Base and rover connectivity The Reach RS4 Pro can operate as both base and rover, supporting RTK work with VRS or a single baseline CORS network in RTCM3 format.  You can also connect another GNSS receiver as an NTRIP base using EMLID NTRIP Caster.  It features a dual_band radio system:      · UHF 450 MHz for transmit and receive, with up to 2 W output (may require a license), compatible with Reach and 3rd_party receivers that support TRIMTALK 450S.      · LoRa 915 MHz for transmit and receive, with up to 1 W output (license_free in North America), compatible with Reach receivers.   Engineered for the harshest environments The Reach RS4 Pro's magnesium alloy body is both light and exceptionally durable, similar to materials used in aerospace and high-end electronics. This combination ensures strength and ease of handling, even in the toughest environments. With up to 16 hours of continuous operation on a single charge, the RS4 Pro is designed for long field days. It can be recharged via USB-C or powered by a portable power bank for added flexibility.   Thanks to its IP68 rating, the receiver is completely dustproof and waterproof, continuing to operate reliably in rain, snow, or dusty construction sites. Operating temperatures range from -40°C to +65°C, ensuring consistent performance in both extreme cold and intense heat.   Software for every stage of your project The Reach RS4 Pro includes EMLID Flow, a complete mobile and cloud-based solution compatible with iOS and Android. It keeps your team coordinated and your projects running smoothly while supporting all essential site tasks.   With EMLID Flow, you can coordinate your team by inviting members, sharing projects, and managing access. Monitor field progress directly from the office and exchange data in real time with automatic synchronisation. The unified workflow ensures consistent data, a familiar interface, and no need for additional training.   On site, EMLID Flow enables you to carry out key surveying tasks efficiently:       · Topographic surveys for precise terrain and elevation data     · Stakeout and layout operations for placing points, lines, and markers     · Line and road surveys for staking centerlines and offsets     · Cut and fill calculations for measuring earthworks and stockpiles     · As-built verification to ensure structures match design plans   Technical Specifications:   Imaging     ·  Image sensors: 1/2.6 in, CMOS, global shutter, Full HD Field of view:     ·  Front camera: H: 64.6°, V: 42.8°     ·  Bottom camera: H: 63°, V: 42°     ·  Video frame rate: 25 fps    Mechanical     ·  Dimensions: 128.6 x 128.6 x 99.3 mm     ·  Weight: 920 g (2.028 lb)     ·  Operating temperature: -40 to +65 °C (-40 to 149 °F)     ·  Ingress protection: IP68    Electrical     ·  Autonomy: 16 hrs as RTK rover with tilt     ·  Battery: Li-Ion 5000 mAh, 7.2 V, 36 Wh     ·  Charging: USB Type-C (PD): 5V—3A, 9V—3A, 12V—3A, 15V—3A    Positioning     ·  Static: H: 4 mm + 0.5 ppm | V: 8 mm + 1 ppm     ·  PPK: H: 5 mm + 0.5 ppm | V: 10 mm + 1 ppm     ·  RTK: H: 7 mm + 1 ppm | V: 14 mm + 1 ppm     ·  Tilt compensation: RTK + 2 mm + 0.3 mm/°     ·  Convergence time: ~5 s typically    Connectivity     ·  LoRa radio: up to 1W     ·  Frequency range: 868/915 MHz     ·  Power: 0.1 W     ·  Distance: Up to 8 km     ·  UHF radio: up to 2W     ·  Frequency range: 410 - 470 MHz     ·  Protocols: TRIMTALK 450S     ·  Modulation type: GMSK     ·  LTE modem     ·  Regions: Global     ·  Bands: FDD-LTE: 1, 2, 3, 4, 5, 7, 8, 12, 13, 18, 19, 20, 26, 28 TD-LTE: 38, 39, 40, 41 UMTS (UHPS/FDD): 1, 2, 5, 8 Quad-band, 850/1900, 900/1800 MHz     ·  SIM card: Nano-SIM     ·  Wi-Fi: 802.11 b/g/n     ·  Bluetooth: Bluetooth 5.1 (BR/EDR + LE)     ·  Ports: RS-232, USB Type-C  *Use the correct antenna, LoRa or UHF, for your setup    Data protocols     ·  Corrections: NTRIP, RTCM3     ·  Position output: NMEA, LLH/XYZ     ·  Data logging: RINEX, NMEA, LLH/XYZ, UBX     ·  Internal storage: 16 GB    GNSS     ·  Signal tracked: GPS: L1C/A, L2C, L5, GLONASS: L1OF, L2OF, Galileo: E1-B/C, E5a, E6, BeiDou: B1I, B1C, B2a, B3I, QZSS: L1C/A, L1C/B11, L2C, L5, NavIC: L1-SPS Data, L5-SPS     ·  Number of channels: 672     ·  Update rates: up to 10 Hz

The SHARE SLAM S20 is a handheld, ultra-compact 3D LiDAR scanner that delivers high-precision 3D point clouds in real-time with color information. It combines two high-quality 16-megapixel CMOS cameras with a mechanical shutter to produce distortion-free, true-color images for realistic color enrichment of the point clouds. The scanner uses proprietary LiDAR-SLAM and Visual-SLAM algorithms that enable precise positioning and environmental reconstruction even in complex scenarios. An integrated RTK and GNSS module provides georeferenced survey data with an accuracy of up to 1 cm, without the need for external antennas or 4G cards.   Weighing only about 1.08 kg and featuring an ergonomic design, the SHARE SLAM S20 offers flexibility and mobility ideal for demanding surveying tasks in architecture, construction, forestry, and industry. The battery life of up to 150 minutes allows long operating times, with fast charging via USB-C for short recharge intervals. The scanner supports WIFI 6 and Bluetooth for fast data transfer and includes 256 GB of storage, expandable via SD card. Its open hardware interfaces and SDK enable seamless integration into existing workflows as well as custom adaptations.   SHARE offers comprehensive software for the SLAM S20: SHARE Capture (iOS and Android) is a mobile app for controlling the scanner and capturing data directly on a smartphone or tablet. SHARE PointClouds Studio (PC) is desktop software for post-processing, visualizing, and exporting point clouds and image data, supporting various formats such as PCD, PLY, and LAS. SHARE Data Manager is an additional tool for data management and export.   The SHARE SLAM S20 is optimized for modern 3D modeling methods, including Gaussian Splatting and photogrammetric workflows, and integrates easily into BIM and CAD systems. The combination of high-resolution camera, precise LiDAR sensor, and powerful software makes it a powerful tool for professional, efficient, and versatile 3D surveying.   Technical Specifications SHARE SLAM S20       · Weight: 1079 g (main unit), 350 g (handle battery)     · Dimensions: 110.5 × 140 × 313.3 mm     · Battery: 45.36 Wh / 3150 mAh, runtime up to 150 min     · Charging port: USB-C, PD 30W fast charging     · Cameras: 2 × 16 MP, 1-inch CMOS sensors, mechanical shutter     · Image size: 3504 × 4672, JPG format     · LiDAR point density: approx. 200,000 points/sec, point cloud thickness ≤ 1 cm     · Scan range: 0.1–40 m (10% reflectivity), up to 70 m (80% reflectivity)     · Accuracy: relative accuracy ≤ 1 cm, absolute accuracy ≤ 5 cm     · RTK accuracy: horizontal 0.8 cm + 1 ppm, vertical 1.5 cm + 1 ppm     · SLAM algorithms: proprietary LiDAR SLAM and Visual SLAM     · Camera field of view: horizontal 140°, vertical 200°     · Protection class: IP5X     · Storage: internal 256 GB, expandable via TF card     · Communication: WIFI 6 (2.4 GHz/5 GHz), Bluetooth     · Operating temperature: -20 °C to +50 °C     · Storage temperature: -20 °C to +60 °C

Light handheld camera for real-time 3D scanning and interactive spatial models with 3D Gaussian Splatting technology.

Light handheld camera for real-time 3D scanning and interactive spatial models with 3D Gaussian Splatting technology.

Greenvalley LiPod P1 Der LiPod P1 3D-Laserscanner ist ein hochpräziser long-range Scanner von GreenValley International (GVI), der in verschiedenen komplexen Umgebungen p ...

SHARE SLAM S20 ...

DJI Matrice 400, fawn rescue drone, wildlife rescue, thermal imaging drone, AI drone, Rehkitzrettung, drone bundle, long flight time, search and rescue

Discover the DJI Matrice 400 Surveying bundle (+2 Batteries, D-RTK 3 + GCPs) for unmatched performance, flight endurance, and obstacle detection. Ideal for critical missions.

Discover the DJI Matrice 400 Inspection (+2 Batteries + H30T + Training) for unparalleled performance. Experience 59 minutes of flight time and advanced obstacle detection!

Discover the DJI Matrice 400 Live Inspection (+2 Batteries + H30T + 21), offering 59 mins flight time, advanced obstacle detection, and unmatched performance.

Experience unparalleled flight capabilities with the DJI Matrice 400 Kl-Inspect (+2 Batteries + Phase One P3 + Software). Perfect for demanding missions!

DJI M400 with up to 6 kg payload and 55 min flight time for surveying, inspection, AI, wildlife rescue, construction, energy, agriculture, RTK, lidar, thermal imaging

Experience unmatched performance with the DJI Matrice 400 aircraft. 59 mins flight time, obstacle detection, and 12 months of DJI Care Enterprise Plus.

Experience unrivaled performance with the DJI Matrice 400 Rental / Leasing. Up to 59 minutes flight time and advanced obstacle detection for critical missions.

Experience unmatched performance with the DJI Matrice 400 L2 Bundle (+2 batteries, L2, D-RTK 3 & more). Flight time up to 59 minutes, perfect for any mission!

GREENVALLEY LiAir X4 + LiGeoreference LiAir X4 ist die neueste Generation des autonomen LiDAR-Datenerfassungssystems für den Flug, entwickelt von GVI. Es integriert einen ...

The GreenValley LiGrip O2 Lite is a lightweight, portable SLAM LiDAR 3D scanner that utilizes MLF-SLAM technology (Multiple Localization Fusion-SLAM). This multi-sensor fusion positioning technology enables precise and reliable mapping even in low-feature and featureless environments such as airports, beaches, river areas, or other difficult-to-capture scenarios.   The development of the MLF-SLAM algorithm represents a breakthrough, enabling high-precision mapping in weak or signal-free environments. The compact device weighs about 1.3 kg and offers an absolute accuracy of under 3 cm with high-resolution 3D point clouds precisely aligned horizontally and vertically according to surveying standards.   The advanced combination of dual 12-megapixel panoramic cameras and two 1.3-megapixel VSLAM cameras ensures realistic, colored 3D real-time capture that can be directly exported and is suitable for applications such as earthwork calculation, individual tree segmentation, or topographic mapping. The fusion of visual SLAM and LiDAR SLAM depth data significantly improves mapping quality even in complex environments.   As an integrated solution, the system enables simultaneous acquisition of multiple data types (3D point clouds, panoramic images, 3D Gaussian splatting, MESH) in one collection, overcoming the limitations of traditional sequential acquisitions. Data collection can be performed in various modes: handheld, backpack, frontpack, and telescopic pole, allowing optimal adaptation to different operational scenarios.   The self-developed RTK-SLAM technology, combined with the telescopic pole, offers highly precise RTK data acquisition over the entire range with an accuracy of under 5 cm in just one minute, even without a GNSS signal.   Software   The supporting collection management software is compatible with Android and iOS platforms and offers features such as project management, real-time point cloud display, panoramic image viewing, and straightforward firmware updates, making the operation and processing of captured data efficient.   Application Scenarios       · Measurements in weak or featureless areas, e.g., highway surveys, no-fly zones, reclamation sites, shallow water areas, mining, and riverbank measurements     · Topographic surveying, meeting the demands for precise point clouds in topographic map revisions (1:500 scale)     · Volume measurement of stockpiles with real-time point clouds and accurate height and volume recording     · Forestry surveying of large forest stands, including tree count, positions, height, crown width, diameter at breast height, and species identification     · Capture of underground parking lots, utility or air-raid shelters, shopping malls, caves, etc., for accurate 3D spatial information for design and planning     · Construction surveying including site investigation, design review, construction progress monitoring, quality control, safety management, and project acceptance     · Accident and emergency response with rapid data capture and realistic colored point clouds for investigation and reporting     · Real estate surveying with rapid 3D structural capture supporting ownership proof, renovations, and planning   Technical Specifications LiGrip O2 Lite       · Weight: approx. 1.3 kg (including base, battery, and RTK module)     · Absolute Accuracy: < 3 cm     · Relative Accuracy: < 2 cm     · Repeatability: < 2 cm     · Protection Class: IP64     · Storage: 512 GB SSD     · Interface: USB Type-C     · Horizontal/Vertical Tilt: < 0.025°     · Control: App and button operation     · Battery Life: approx. 2 hours     · Operating Temperature: -20 °C to 40 °C     · Device Storage Temperature: -40 °C to 70 °C     · Battery Storage Temperature: recommended 22 °C to 30 °C   LiDAR Sensor       · Laser: Mid360     · Scan Rate: 200,000 points per second     · Wavelength: 905 nm     · Maximum Detection Range: 70 m (at 80% reflectance)     · LiDAR Accuracy: 2 cm     · Safety Class: Class 1 (eye-safe)   Camera Parameters       · Number of Cameras: 4 (2 panoramic cameras × 12 MP, 2 visual SLAM cameras × 1.3 MP)     · Field of View: 360° horizontal, -7° to 52° vertical     · Frame Rate: adjustable   RTK Module & GNSS       · Satellite Systems: BDS, GPS, GLONASS, Galileo, QZSS, SBAS     · Channels: 1408     · RTK Accuracy: Horizontal 0.8 cm + 1 ppm, Vertical 1.5 cm + 1 ppm     · RTK Data Format: .rtk, RTCM V3.x, NTRIP   IMU Sensor       · Output Frequency: 200 Hz     · Post-Processing Position Accuracy: Horizontal 0.01 m, Vertical 0.02 m     · Post-Processing Attitude Accuracy: Roll/Pitch 0.005°, Heading 0.01°   Mapping Methods       · MLF-SLAM, PPK-SLAM, RTK-SLAM, SLAM     · Real-time processing and color coding supported   Output Formats       · Colored Point Clouds: LAS, LiData     · Panoramic Images: Imglist + JPG     · MESH: LOD-OSGB     · Gaussian Splatting: lisplat, ply   Accessories and Options       · Telescopic Pole Adapter: weight 300 g, pole diameter 25-25.5 mm     · Frontpack Kit: weight 2.1 kg, dimensions 560 × 340 × 160 mm     · Backpack Kit: weight 3.9 kg, dimensions 580 × 303 × 145 mm     · Dual battery support with hot-swap function     · Compatibility: LiGrip O Series (including O1 Lite and O2 Lite)

XGRIDS - Lixel L2 Pro RTK Standard Kit Das Lixel L2 Pro RTK Standard Kit hilft bei der Verbesserung der Präzision von Positionskoordinaten der Satellitennavigation. Unte ...

GEOCUE LP360 Land Standard Perpetual Software zur Qualitätskontrolle von LiDAR-Daten, Extraktion von Informationen und Ableitung von Produkten aus großen Datensätzen Erm ...

Discover the DJI Matrice 4D (incl. 12 Months DJI Care Enterprise Plus) – a high-performance, water-resistant drone for precision mapping and inspections.

DJI D-RTK 3 GNSS Multifunktionsstation Die neue D-RTK 3 Multifunktionsstation enthält leistungsstarke Antennen und Empfängermodule, die Daten von wichtigen globalen Satel ...

Ein vollständiger Geoworkflow für Ihre LiDAR- und Bilddaten mit Visualisierung, QA/QC-Tools, Klassifizierung, 3D-Bearbeitung und Analysefunktionen. Intuitiver Arbeitsablau ...